OWC 16GB (4x4GB) DDR3L 1600 CL11 1.35V ECC UDIMM desktop RAM
- 16GB (4 x 4GB)
- DDR3L 1600 (PC3L 12…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
A 32 GB DDR3 kit of four 8 GB ECC unbuffered UDIMMs running at 1066 MHz CL7 and 1.5 V for workstations, servers and NAS systems
Capacity 32GB (4 x 8GB)
This kit supplies 32GB of DDR3 1066 memory in four 8GB unbuffered UDIMMs. It targets desktop workstations, servers and NAS systems that require ECC protection. Each module runs at 1.5V with a CL7 latency and a 240-pin form factor.
The modules meet JEDEC and RoHS standards, so they install without voiding the original system warranty. ECC circuitry detects and corrects single-bit errors, improving data integrity for long-running workloads. No heat spreaders or LEDs are fitted, keeping the profile low for dense chassis.
The 32GB total allows simultaneous virtual machines, large datasets and multi-user file services on compatible platforms. Workloads that exceed this capacity will page to storage, reducing responsiveness. The DDR3 1066 speed ceiling limits throughput on newer CPU architectures.
| Brand | OWC |
|---|---|
| Part Number | 8E5D32R8032S |
| Capacity | 32GB (4 x 8GB) |
| Speed | DDR3 1066 (PC3 8500) |
| CAS Latency | CL7 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Workstations, Servers, and NAS Systems |
| LED Color | None |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
No firmware updates or batteries are involved; the modules are passive JEDEC-standard DDR3 DIMMs that operate at 1.5V and 1066MHz without active components.
The DDR3 1066MHz CL7 specification sets the maximum sustained data rate; the memory controller and platform determine whether bandwidth or latency becomes the bottleneck first.
The modules run at 1.5V without heat spreaders or fans, so they add minimal heat and zero acoustic noise; total power draw stays within standard DDR3 limits for 32GB capacity.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟