نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Four green DDR3 ECC registered DIMMs in antistatic tray

OWC

OWC 32GB (4x8GB) DDR3 1333 PC3-10600 CL9 2Rx4 ECC RDIMM memory upgrade

SKU CH-8ZAJ-KHQNZ

A 32 GB DDR3 1333 ECC registered kit of four 8 GB modules for Supermicro SuperWorkstation 7036A and 7046A systems

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • ECC registered design protects data integrity in servers
  • 32 GB kit (4 × 8 GB) expands workstation capacity
  • DDR3 1333 MHz CL9 matches Supermicro 7036A and 7046A specs
  • 240-pin 1.5 V registered DIMM fits qualified SuperWorkstation slots
  • Replaces six Supermicro part numbers for direct upgrade

Capacity & Configuration

This kit provides 32GB of DDR3 memory across four 8GB registered DIMMs. It is built for Supermicro SuperWorkstation 7036A and 7046A systems that require ECC registered modules. The 2Rx4 organisation and 1.5V operation match the original Supermicro part numbers listed by the manufacturer.

Compatibility Guidance

The modules suit administrators upgrading or repairing the named Supermicro workstations, as well as compatible server, NAS or router platforms that accept DDR3 1333 registered ECC DIMMs. Builders assembling standard desktop PCs, or any system that takes only unbuffered non-ECC memory, cannot use this kit. Mixing these registered DIMMs with unbuffered memory is not supported.

Deciding Specification

The memory is DDR3 1333 (PC3-10600) with CL9 latency, 240-pin registered ECC construction and 2Rx4 ranking. If your platform demands a different DDR generation, a different speed grade, unbuffered operation or a different rank structure, this kit will not function correctly.

أبرز المميزات

  • ECC registered design protects data integrity in servers
  • 32 GB kit (4 × 8 GB) expands workstation capacity
  • DDR3 1333 MHz CL9 matches Supermicro 7036A and 7046A specs
  • 240-pin 1.5 V registered DIMM fits qualified SuperWorkstation slots
  • Replaces six Supermicro part numbers for direct upgrade

المواصفات

BrandOWC
Part Number1R3D32R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperWorkstation 7036A Series
Supermicro SuperWorkstation 7046A Series

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How much power does the 1.5 V DDR3 1333 kit draw when the workstation runs continuously?

Each module operates at the standard 1.5 V for DDR3 1333; total consumption depends on the Supermicro 7036A or 7046A platform and load, so consult the system documentation for exact figures.

What must my Supermicro SuperWorkstation already have to accept this 4×8 GB registered ECC kit?

The board needs free 240-pin DDR3 slots that support registered ECC RDIMMs; the 7036A and 7046A series are validated, and the memory cannot be mixed with unbuffered modules.

Will these CL9 2Rx4 RDIMMs work alongside the original Supermicro MEMDR380L modules I am keeping?

Yes — this kit replaces Supermicro part numbers MEMDR380LCL01ER13, MEMDR380LHL01ER13, MEMDR380LHL03ER13, MEMDR380LHV01ER13, MEMDR380LSL02ER13 and MEMDR380LSL06ER13, so it matches the registered ECC specification of those modules.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.