EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
32 GB DDR4 2400 ECC registered VLP DIMM for Supermicro SuperBlade servers
This single 32GB DDR4 2400 CL17 2Rx4 VLP ECC Registered DIMM is built for the Supermicro SuperBlade 7428R-T3N and listed compatible blades. It operates at 1.2V on a 288-pin interface and is validated for server and workstation workloads that require error-correcting registered memory.
The very-low-profile form factor fits dense blade chassis where vertical clearance is limited. Registered buffering and ECC protect data integrity in multi-module configurations, while the 2Rx4 organisation supports high-capacity population. No heat spreader is fitted, relying on chassis airflow. Mixing with unbuffered or load-reduced modules is not supported.
This module directly replaces Supermicro part numbers including MEM-DR432LC-ER24, MEMDR432LCL01ER24 and related variants. The upgrade is justified when expanding capacity in a supported SuperBlade or when replacing failed sticks with a JEDEC-compliant, RoHS-compliant alternative. It will not work in standard desktop systems.
| Brand | OWC |
|---|---|
| Part Number | 2R4V42R432GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 ECC VLP RDIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro SuperBlade 7428R-T3N Supermicro SuperBlade 7128RG-X Supermicro SuperBlade 7428R-C3 Supermicro SuperBlade 7428R-C3N Supermicro SuperBlade 7428R-T3 |
The module runs at DDR4 2400 (PC4-19200) with CL17 latency, providing 19200 MB/s peak bandwidth at 1.2 V.
Yes, the very-low-profile 288-pin form factor is designed for dense Supermicro SuperBlade systems such as the 7128RG-X and 7428R series where vertical clearance is limited.
Populate one module per channel in identical banks, ensure the notch aligns with the 288-pin key, and do not mix with unbuffered or load-reduced DIMMs.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
No language matches that.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟