NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
32 GB DDR4 2666 ECC registered RDIMM for servers, workstations and NAS, 288-pin 2Rx4 CL19 1.2 V, backward compatible with 2133 and 2400 MHz
This 32 GB module runs at DDR4 2666 with CL19 latency and 1.2 V power. It is built as a 2Rx4 registered DIMM with on-die ECC for data integrity. The part matches Hynix HMA84GR7AFR4N-VK and HMA84GR7CJR4N-VK specifications. It targets administrators upgrading workstations, servers or NAS systems that require registered memory.
The registered buffer adds a clock cycle and prevents use in standard desktop motherboards that expect unbuffered DIMMs. Mixing this module with unbuffered memory is not supported and will cause boot failure. Speed falls back to 2133 MHz or 2400 MHz when the platform does not support 2666 MHz. JEDEC compliance ensures correct operation at those lower speeds.
The bare 288-pin PCB fits dense server slots where tall heat spreaders would block airflow or adjacent modules. Absence of a spreader reduces height and weight, easing installation in 1U or blade chassis. Gold-edge contacts meet JEDEC and RoHS standards for long-term reliability. OWC tests every module in-house before shipment.
| Brand | OWC |
|---|---|
| Part Number | 2R6D42R432GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
This module provides 32GB in a single 288-pin registered DIMM. Select it when your platform needs ECC registered memory and you want to add 32GB per slot.
The module runs at 2666MHz with CL19 latency at 1.2V. It will also operate at 2400MHz or 2133MHz if the system requires a lower speed.
The 288-pin registered DDR4 form factor fits only server, workstation or NAS boards that support ECC registered memory. It cannot be used in standard desktop systems or mixed with unbuffered DIMMs.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟