OWC 64GB DDR4 3200 ECC RDIMM CL22 2Rx4 1.2V memory upgrade
- 64GB
- 288-Pin DDR4 ECC RD…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
32 GB DDR4 3200 ECC registered RDIMM for Gigabyte R282 servers, CL22 at 1.2 V
Capacity 32GB
This 32GB DDR4 3200 module is built for Gigabyte R282-3C0, R282-3C1, R282-3C2, R282-G30 and R282-N80 systems. It delivers error-correcting registered memory required by server and workstation platforms. The single 2Rx4 DIMM operates at 1.2V with CL22 latency and fits 288-pin slots. Buyers needing unbuffered desktop memory or load-reduced DIMMs cannot use this module.
The module runs at 3200 MT/s and is backward compatible with 2133, 2400, 2666 and 2933 MT/s speeds. Upgrading is worthwhile when existing memory limits virtualization density, database caching or multi-user workloads on these specific Gigabyte platforms. It will not fit standard desktop motherboards or systems requiring unbuffered or load-reduced memory types.
Confirm the exact R282 variant matches the supported list before ordering. Check the system documentation for maximum supported capacity per slot and total system limit. Ensure all installed DIMMs are ECC registered 2Rx4 modules; mixing with unbuffered or load-reduced memory is not supported. The platform must accept 1.2V DDR4 registered DIMMs.
| Brand | OWC |
|---|---|
| Part Number | 3R2D42R432GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | 22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Gigabyte R282-3C0 Gigabyte R282-3C1 Gigabyte R282-3C2 Gigabyte R282-G30 Gigabyte R282-N80 |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Yes, the 288-pin ECC registered module is validated for the Gigabyte R282-3C0, R282-3C1, R282-3C2, R282-G30 and R282-N80 systems.
Align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, and ensure the registered buffer contacts are fully seated.
Replace the module if memory diagnostics report uncorrectable ECC errors, the system fails POST with the DIMM installed, or the server requires capacity beyond 32 GB per slot.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟