OWC 128GB DDR5 4800 CL40 4Rx4 288-pin 1.1V ECC Registered RDIMM Gigabyte R283-P93
- 128GB
- 288-Pin DDR5 ECC RD…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
A 128GB DDR5 4800 ECC registered DIMM for Gigabyte R283 and S453 workstations and servers
This module is a single 128GB DDR5 4800 CL40 4Rx4 ECC Registered DIMM built to JEDEC standard. It operates at 1.1V and uses the 288-pin form factor. The kit is validated for specific Gigabyte server and workstation platforms including the R283-Z96, R283-Z97, R283-ZF0, R283-ZF1 and S453-Z30 systems.
This memory targets administrators upgrading compatible Gigabyte workstations, NAS units, servers or network switches where ECC Registered DDR5 is required. It is not suitable for standard desktop computers or consumer laptops. Builders who need unbuffered or load-reduced ECC memory cannot mix this module with those types.
The 4Rx4 organisation is the critical specification that the memory controller and BIOS must support. Systems qualified only for lower rank densities will not recognise the full 128GB capacity. Verify the platform documentation for 4Rx4 support before purchase.
| Brand | OWC |
|---|---|
| Part Number | 4R8D54R4128G |
| Capacity | 128GB |
| Type | 288-Pin DDR5 ECC RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | 40 |
| Voltage | 1.1V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Heat Spreader | No |
| Compatible System | Gigabyte R283-Z96 Gigabyte R283-Z97 Gigabyte R283-ZF0 Gigabyte R283-ZF1 Gigabyte S453-Z30 |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The module operates at 1.1V, the standard DDR5 voltage, so power draw per DIMM stays low even under sustained 4800 MT/s workloads in Gigabyte R283-Z96 or R283-Z97 systems.
A DDR5-capable server or workstation board with a 288-pin RDIMM slot and registered-ECC support — such as the Gigabyte R283-Z96, R283-Z97, R283-ZF0, R283-ZF1 or S453-Z30 — is required.
No — the 4Rx4 registered ECC design cannot be mixed with unbuffered, load-reduced or different-rank DDR5 modules; all slots must use identical 4Rx4 registered DIMMs.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟