eshinreal 4 Port Mini PCIe to SATA 3 Expansion Card
- Controller Card
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
128GB DDR5 4800 ECC registered RDIMM for server and workstation upgrades
This 128GB DDR5 4800 ECC Registered RDIMM is built for workstations and servers that require error-correcting registered memory. It operates at 1.1V with CL40 latency and a 4Rx4 rank configuration across 288 pins. The module replaces Hynix parts HMCT04MEERA129N, HMCT04MEERA131N, HMCT04MEERA133N and HMCT04MEERA135N.
The DDR5 4800 standard provides a PC5-38400 data rate that cannot be exceeded without platform support for higher JEDEC speeds. Registered DIMMs add a clock cycle of buffering that desktop consumer boards do not expect. Mixing this module with unbuffered or load-reduced ECC memory is not supported by the memory controller.
This module upgrades systems currently running lower-capacity or slower registered ECC DDR5 DIMMs where the platform qualifies 128GB 4Rx4 parts at 4800 MT/s. The jump is worth it when the workload demands maximum registered memory density per slot and the server or workstation vendor lists these Hynix part numbers as compatible.
| Brand | OWC |
|---|---|
| Part Number | 4R8D54R4128G |
| Capacity | 128GB |
| Type | 288-Pin DDR5 ECC RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.1V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Heat Spreader | No |
Choose this 128GB 4Rx4 module when your platform requires a single high-density registered DIMM at DDR5 4800 with CL40 latency and 1.1V operation.
The module runs at 4800 MT/s, providing a peak bandwidth of 38400 MB/s per DIMM with CL40 timing and ECC error correction active.
The 288-pin RDIMM form factor fits only DDR5 server and workstation boards that support registered ECC memory; it cannot be used in unbuffered or consumer platforms.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟