OWC 32GB (2x16GB) DDR4 2666MHz ECC UDIMM memory upgrade
- 32GB (2 x 16GB)
- 288-Pin DDR4 ECC UD…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
Four 16 GB DDR4 ECC UDIMM modules running at 2666 MHz add 64 GB of error-correcting memory to Synology RS2418+ and RS2418RP+ NAS systems
Capacity 64GB (4 x 16GB)
This 64GB kit contains four 16GB DDR4 2666 ECC UDIMM modules built for the Synology RackStation RS2418+ and RS2418RP+. The unbuffered 288-pin DIMMs run at 1.2V with CL19 latency and 2Rx8 organisation. It targets administrators who need the maximum supported memory for virtualization, heavy file serving or surveillance workloads on these specific NAS units.
The modules step up from the standard installed DIMMs by adding error-correcting code and a full 64GB capacity across all four slots. The upgrade is worth it when the workload regularly hits the memory ceiling, triggers swapping or requires ECC protection for data integrity. The kit is backward compatible with 2133MHz and 2400MHz bus speeds, so it will clock down automatically if the system requires it. Buyers who need more than 64GB or registered DIMM support cannot use this kit.
Installation is a straightforward DIY task: power down the unit, open the chassis and press each module into the 288-pin slots until the latches click. The most common issue is populating the slots in the wrong order, which can prevent the NAS from recognising the full capacity. Follow the manufacturer’s slot-population guide for the RS2418+ and RS2418RP+ to avoid a no-post condition. No heat spreaders are fitted, so airflow clearance is not a concern.
| Brand | OWC |
|---|---|
| Part Number | 2E6D42R8064S |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR4 ECC UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | Synology RackstationRS2418+ Synology RackstationRS2418RP+ |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Yes, the kit uses 288-pin DDR4 ECC UDIMM modules, which are the correct form factor for the RS2418+ and RS2418RP+ memory slots.
You can install them one at a time; the system supports mixed capacities, but the common mistake is not seating each module until the retention clips click on both ends.
ECC UDIMM modules have no scheduled replacement interval; they run at 1.2 V with no heat spreader, so they typically last the life of the RS2418+ unless a module fails.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟