OWC 16GB DDR5 5200 CL42 1Rx4 288-pin 1.1V ECC Registered RDIMM server RAM
- 16GB
- 288-Pin DDR5 ECC RD…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
A 64 GB DDR5 ECC registered RDIMM kit of four 16 GB modules running at 5600 MT/s with CL46 latency and 1.1 V operation for compatible workstations and servers
Capacity 64GB (4 x 16GB)
This OWC kit provides 64 GB of DDR5 5600 memory across four 16 GB modules. It uses 288-pin RDIMMs with ECC and registered buffering for error correction and signal integrity. The modules run at 1.1 V with a CAS latency of CL46. They are built for workstations, servers, NAS systems and network switches that require registered ECC memory.
The memory suits administrators upgrading or building systems that specifically support DDR5 registered ECC RDIMMs. It will not work in standard desktop computers or consumer motherboards that accept only unbuffered non-ECC modules. It also cannot be mixed with load-reduced or unbuffered ECC memory. Buyers needing unbuffered memory or consumer DDR5 should look elsewhere.
Four 16 GB modules deliver 64 GB total, fitting four DIMM slots in a dual-channel configuration. The kit handles typical server workloads such as virtualization, database caching and file serving within the DDR5 5600 JEDEC standard. Systems requiring more than 64 GB or higher memory speeds will need additional modules or a faster-rated kit.
| Brand | OWC |
|---|---|
| Part Number | 5R6D51R4064S |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR5 ECC RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.1V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Yes. This kit requires a workstation or server board with 288-pin DDR5 slots that accept ECC Registered RDIMMs running at 1.1V. Standard desktop boards cannot use it.
No. Registered DIMMs must not be mixed with unbuffered or load-reduced memory. All slots should be populated with identical registered modules.
Check the memory speed and timings in the system BIOS or a hardware utility such as CPU-Z; they should report DDR5-5600 with CAS latency 46.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟