OWC 16GB (2x8GB) DDR3L 1333 PC3L-10600 CL9 2Rx4 240-pin 1.35V ECC Registered RDIMM memory upgrade
- 16GB (2 x 8GB)
- 240-Pin DDR3L ECC R…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
Adds 8 GB of DDR3L ECC registered memory at 1333 MHz to compatible Cisco UCS B200 M2 servers
Capacity 8GB
This 8GB DDR3L registered DIMM is built for the Cisco UCS B200 M2 blade server. It targets administrators extending the life of that platform or populating empty slots during a refresh. The module is not compatible with standard desktop computers or unbuffered memory configurations.
The single specification that decides fit is the registered ECC design with 2Rx4 rank structure. The Cisco UCS B200 M2 requires registered modules and cannot mix them with unbuffered or load-reduced DIMMs. This module meets that requirement directly.
One module adds 8GB of addressable memory running at PC3L-10600 speed with CL9 latency. It handles typical virtualisation workloads and database buffers within the B200 M2 slot limits. Capacity runs out when the chassis reaches its maximum DIMM count or when applications demand higher per-core bandwidth than DDR3L 1333 can deliver.
| Brand | OWC |
|---|---|
| Part Number | 1R3T32R408GB |
| Capacity | 8GB |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Cisco UCS B200 M2 |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The module runs at DDR3L 1333 (PC3L-10600) with CL9 latency, delivering the rated throughput the server's memory controller expects for this platform.
It requires a server or workstation board that supports registered ECC DDR3L DIMMs; it will not work in standard desktop systems or alongside unbuffered or load-reduced memory.
It fits a 240-pin DDR3 DIMM slot and operates at 1.35 V, matching the Cisco UCS B200 M2 memory socket specification.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟