OWC 4GB DDR4 2400MHz CL17 1.2V 288pin UDIMM 2U4D41R804GB memory upgrade
- 4GB
- 288-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
An 8 GB DDR3L 1600 SODIMM upgrade for the Dell Inspiron 20 3052, running at 1.35 V with CL11 latency
This single 8GB module upgrades the Dell Inspiron 20 3052 with DDR3L 1600 memory. It targets owners of that all-in-one who need more capacity for everyday multitasking. The 204-pin SODIMM fits the system's specific slot without adaptation. Buyers whose machine requires a different form factor or voltage cannot use this part.
The module runs at 1.35V with CL11 latency under the JEDEC PC3L-12800 standard. Unbuffered, non-ECC operation delivers consistent throughput for typical desktop workloads. Two ranks per channel (2Rx8) help maintain bandwidth during extended sessions. No heat spreader is fitted, so airflow in the chassis manages thermals.
A bare green PCB with gold-edge contacts keeps the profile low for tight all-in-one internals. The 204-pin keying prevents misinsertion and guides a straight vertical seat. JEDEC and RoHS compliance means the upgrade preserves the original system warranty. Installation follows the standard SODIMM latch procedure, requiring no tools beyond fingertip pressure.
| Brand | OWC |
|---|---|
| Part Number | 1S6T32R808GB |
| Capacity | 8GB |
| Type | 204-Pin DDR3L Non-ECC SODIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | Dell Inspiron 20 3052 |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The module operates at 1.35V, which is the standard low voltage for DDR3L. Actual power draw depends on the system's memory controller and workload, but the lower voltage reduces heat compared to 1.5V DDR3.
Yes. The upgrade requires an available 204-pin DDR3L SODIMM slot. The 3052 uses SODIMM memory, so verify the slot is accessible and not already populated beyond the board's maximum capacity.
The module is JEDEC-standard DDR3L 1600 CL11 at 1.35V. If the existing memory matches that speed and voltage, the system will typically run both at the lowest common timing. Mismatched speeds or voltages can cause instability.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟