OWC 8GB DDR3 1600 CL11 2Rx8 204-pin 1.5V SODIMM memory upgrade
- 8GB
- 204-Pin DDR3 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
An 8 GB DDR3L SODIMM running at 1600 MHz with CL11 latency and 1.35 V, built for the Dell Inspiron 17R 5737
This single 8GB DDR3L SODIMM is built for the Dell Inspiron 17R 5737 laptop. It runs at 1600MHz with CL11 latency and 1.35V operation. The 204-pin unbuffered module uses 2Rx8 organisation and carries no heat spreader. It targets owners of that specific notebook who want a straightforward capacity increase.
The module conforms to JEDEC PC3L-12800 standards at 1.35V, reducing power draw compared to standard 1.5V DDR3. Lower voltage means less heat inside the chassis and quieter fan behaviour during everyday workloads. No active cooling is required on the stick itself. Power efficiency supports longer battery runtime in mobile use.
The compact 204-pin layout fits the Inspiron 17R 5737 memory socket without clearance issues. Non-ECC unbuffered design matches the platform's memory controller requirements. Installation is a simple DIY step that does not void the system warranty. Users needing ECC or registered memory must choose a different product.
| Brand | OWC |
|---|---|
| Part Number | 1S6T32R808GB |
| Capacity | 8GB |
| Type | 204-Pin DDR3L Non-ECC SODIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | Dell Inspiron 17R 5737 |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Power off the laptop, remove the battery if accessible, open the memory compartment, align the notch on the 204-pin module with the slot key, press firmly until the side clips click, then replace the cover and battery before booting.
No scheduled maintenance is required; the module has no heat spreader or moving parts, so replacement is only needed if a memory error appears or capacity becomes insufficient for your workload.
The DDR3L 1600 CL11 timing and 1.35V voltage set the bandwidth and latency ceiling; sustained heavy multitasking will hit that throughput limit before any thermal throttle occurs.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟