OWC 16GB DDR4 2666 ECC SODIMM 2Rx8 CL19 1.2V 260-pin memory upgrade for ASUSTOR AS7110T
- 16GB
- 260-Pin DDR4 ECC SO…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
An 8 GB DDR5 5200 CL42 UDIMM upgrade built for the HP OMEN 45L GT22-2085t desktop
Capacity 8GB
This OWC module is an 8GB DDR5 5200 UDIMM built for the HP OMEN 45L GT22-2085t desktop. It runs at 1.1V with CL42 latency in a single-rank 1Rx8 configuration. The 288-pin unbuffered non-ECC design matches the system's memory slots for a direct fit.
The upgrade replaces any lower-speed DDR5 memory currently installed in the OMEN 45L GT22-2085t. The jump is worth it when the existing memory runs below 5200 MT/s or when total capacity limits multitasking. JEDEC compliance ensures the new module operates at the platform's rated specification without manual tuning.
This single 8GB stick suits owners adding capacity to a free slot or matching an identical module for dual-channel operation. Buyers who want more storage capacity or require ECC error correction should look at something else, as this kit provides neither. Systems outside the OMEN 45L GT22-2085t are not validated for this part.
| Brand | OWC |
|---|---|
| Part Number | 5U2D51R808GB |
| Capacity | 8GB |
| Type | 288-Pin DDR5 Non-ECC UDIMM |
| Speed | DDR5 5200 (PC5 41600) |
| CAS Latency | CL42 |
| Voltage | 1.1V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Heat Spreader | No |
| Compatible System | HP OMEN 45L GT22-2085t |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Yes, the 288-pin DDR5 UDIMM is designed for the HP OMEN 45L GT22-2085t and matches the board's DDR5 memory slots.
Align the notch on the module with the key in the DDR5 slot, press down firmly until the side clips click into place.
No firmware update is needed; the JEDEC-standard 1.1V module runs at stock settings and does not have a scheduled replacement interval.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟