نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

OWC

OWC 8S5D32R804GB 4GB DDR3 1066 CL7 2Rx8 1.5V SODIMM memory upgrade

SKU CH-94C1-8WSYV

Adds 4 GB of DDR3-1066 CL7 SODIMM memory to a Dell Precision M6400 laptop

  • Capacity4GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.5V
  • ECCNo
  • Boosts system responsiveness with 4GB DDR3 1066 CL7 module
  • JEDEC-standard design ensures reliable compatibility with Dell Precision M6400
  • Unbuffered non-ECC architecture provides stable operation for everyday tasks
  • 204-pin SODIMM form factor fits directly into laptop memory slots
  • 5V operation matches original specification for warranty-safe upgrade

Dell Precision M6400 module

This is a new 4GB DDR3 SODIMM built to upgrade the Dell Precision M6400 mobile workstation. It runs at 1066MHz with CL7 latency and uses the standard 204-pin unbuffered non-ECC layout. The single module delivers a straightforward capacity increase for that specific platform.

Suitable for M6400 owners needing more memory

The part matches the factory voltage of 1.5V and the JEDEC PC3-8500 timing, so it installs without configuration changes. It is not for systems that require ECC or registered modules, nor for boards that only accept different pin counts or voltages.

204-pin DDR3 1066MHz CL7 SODIMM

The 204-pin DDR3 interface at 1066MHz with CL7 timing is the single specification that decides fit. If the target machine calls for this exact pin count, speed and latency, the module will work; otherwise it will not seat or post.

أبرز المميزات

  • Boosts system responsiveness with 4GB DDR3 1066 CL7 module
  • JEDEC-standard design ensures reliable compatibility with Dell Precision M6400
  • Unbuffered non-ECC architecture provides stable operation for everyday tasks
  • 204-pin SODIMM form factor fits directly into laptop memory slots
  • 5V operation matches original specification for warranty-safe upgrade

المواصفات

BrandOWC
Part Number8S5D32R804GB
Capacity4GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemDell Precision M6400

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Will this 204-pin DDR3 1066 SODIMM work in the second slot if I keep an existing PC3-8500 module in the first slot?

Yes — both modules run at 1066 MHz with CL7 timing and 1.5 V, so the system will operate them in dual-channel mode without down-clocking.

How can I verify the module is detected at the correct 1066 MHz speed after installing it in my Dell Precision M6400?

Open Task Manager’s Performance tab or run CPU-Z; the memory section should show 1066 MHz (PC3-8500) and CL7 latency for the new 4 GB SODIMM.

Does the 8S5D32R804GB package include only the single 4 GB SODIMM, or are tools and thermal pads also supplied?

The box contains only the 204-pin DDR3 SODIMM; no screwdriver, thermal pad or additional hardware is included.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.