HP 507283-001 146GB 10000 RPM SAS 2.5" internal hard drive
- Bare Drive
- SATA
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Oyen Digital
Portable NVMe SSD with USB-C and Thunderbolt 3 delivering up to 1050 MB/s for 4K and 8K video workflows
Capacity 2TB
الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.
The Oyen Digital Helix Dura is a 2TB portable NVMe SSD built for creative professionals handling large video and photo libraries. It uses 3D TLC NAND flash and an ASMedia ASM2362 controller to deliver fast transfers over USB-C and Thunderbolt 3 connections. The aluminium housing aids heat dissipation and protects the drive from physical shock rated at 1500G.
The drive operates silently with no moving parts and relies on its aluminium enclosure to dissipate heat during typical workloads. Power is drawn directly from the host USB-C or Thunderbolt 3 port so no external adapter is required. Sequential speeds reach up to 1050 MBps on USB 3.2 Gen 2 and drop to 525 MBps when connected via USB 3.0.
Under continuous heavy transfers the controller maintains performance using UASP and TRIM support while the metal chassis spreads thermal load across its surface. The PCIe NVMe 3.0 x4 architecture keeps latency low for 4K and 8K video workflows without throttling in normal ambient conditions. Compatibility spans Windows, Mac and Linux systems with plug-and-play operation.
| Brand | Oyen Digital |
|---|---|
| Series | Helix Dura |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D TLC NAND |
| Interface | USB 3.2 |
| Thunderbolt 3 | Yes |
| Controller | ASMedia ASM2362 |
| Color | Black |
| Max Sequential Read | Up to 1050 MBps |
| Max Sequential Write | Up to 1050 MBps |
| System Requirements | Compatible with Windows, Mac, Linux |
| Max Shock Resistance | 1500G |
| Width | 4.2" |
| Depth | 1.54" |
| Height | 0.68" |
| Weight | 5 oz. |
Connect the included USB-C cable to a USB 3.2 Gen 2 or Thunderbolt 3 port; the step people miss is using a USB 3.0 port instead, which halves speed to 525 MB/s.
The 3D TLC NAND and ASMedia ASM2362 controller have no moving parts; keep firmware updated via the OS and replace the drive only if capacity runs out or after extreme shock exceeds 1500G.
Thermal throttling from the aluminum enclosure typically limits sustained writes before the 1050 MB/s ceiling is reached, especially in warm environments.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟