نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Three white 120mm square case fans with ARGB lighting loops and hydro bearings, shown together in a 3-pack arrangement

PANO-MOUNTS

PANO-MOUNTS 120mm ARGB PWM Case Fan 3-Pack White

SKU CH-MC4Z-Y7S2Y

Three 120 mm hydro-bearing fans deliver 38.5 CFM at 23 dBA with 5V addressable RGB and PWM control from 800 to 1600 RPM

  • Fan Size120mm
  • LEDARGB
  • TypeCase Fan
  • Bearing TypeHydro Bearing
  • RPM800-1600RPM±10%
  • Air Flow38.5CFM
  • 5V addressable RGB with 20 individually controlled LEDs per fan for vivid lighting effects
  • Hydro bearing rated for 30000 hours of quiet operation
  • PWM speed control from 800 to 1600 RPM balancing airflow and noise
  • Included SATA hub with two ports powers fans without motherboard ARGB headers
  • 23 dBA at maximum speed keeps builds whisper-quiet

Three-fan ARGB cooling kit

This pack supplies three 120 mm hydro-bearing fans with 5 V addressable RGB lighting and 4-pin PWM control. Each unit moves up to 38.5 CFM at 1600 RPM while keeping noise to 23 dBA. A SATA-powered hub with two ports drives the lighting when the motherboard lacks a 5 V ARGB header.

Builders who want synchronised lighting

The fans integrate with Asus Aura Sync, Gigabyte RGB Fusion and MSI Mystic Light for unified colour control across the system. Users without a compatible 5 V header can still power the LEDs via the included hub, though synchronisation will not be available. Buyers needing higher static pressure for dense radiators should look at specialised models.

Standard 120 mm mounting fits most cases

The 25 mm thick frames use the common 120 mm hole pattern and ship with 450 mm cables for flexible routing. PWM headers allow the motherboard to vary speed between 800 and 1600 RPM based on temperature. The SATA hub draws power directly from the PSU, freeing motherboard fan headers for other components.

أبرز المميزات

  • 5V addressable RGB with 20 individually controlled LEDs per fan for vivid lighting effects
  • Hydro bearing rated for 30000 hours of quiet operation
  • PWM speed control from 800 to 1600 RPM balancing airflow and noise
  • Included SATA hub with two ports powers fans without motherboard ARGB headers
  • 23 dBA at maximum speed keeps builds whisper-quiet

المواصفات

BrandPANO-MOUNTS
Fan Size120mm
LEDARGB
TypeCase Fan
Bearing TypeHydro Bearing
RPM800-1600RPM±10%
Air Flow38.5CFM
Noise Level23dBA
Power Connector4 Pin
ColorWhite
CompatibilityCase
Fan Counts3 Fans
Fan ControllerNo Controller
Fan Thickness25mm
Features5V Addressable RGB Lighting
Dimensions120×120×25mm 4.72*4.72*0.98in

أسئلة حول هذا المنتج

Does my motherboard need a 5 V ARGB header to use the lighting on these fans?

The fans use a 5 V ARGB connector, but the included SATA hub lets you power the lights without a motherboard ARGB header — you lose synchronisation with Asus Aura Sync, Gigabyte RGB Fusion or MSI Mystic Light Sync.

Will the 4-pin PWM connectors work with a motherboard that only has 3-pin fan headers?

Yes, the 4-pin PWM plugs are backward-compatible with 3-pin headers; the fans will run at full 1600 RPM instead of the 800–1600 RPM PWM range.

How can I confirm the fans are spinning within the rated range after installation?

Check your motherboard BIOS or monitoring software — each fan should report between 800 and 1600 RPM with a tolerance of ±10 %.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.