نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Three white 120mm square fans with infinity mirror centres and ARGB rings, 25mm thick, shown as a triple pack

PANO-MOUNTS

PANO-MOUNTS 120mm Reverse Airflow ARGB Infinity Mirror White 3-Pack case fan

SKU CH-BSWT-1EA1D

Three 120 mm white case fans with reverse airflow, infinity-mirror ARGB lighting and 2-ball bearings move 63 CFM at 600–1600 RPM while staying at 20–25 dBA

  • Fan Size120mm
  • LEDARGB
  • TypeCase Fan
  • Bearing Type2 Ball
  • RPM600-1600RPM
  • Air Flow63CFM
  • Reverse airflow directs air efficiently through tight builds
  • Infinity mirror ARGB lighting creates vivid visual depth
  • 20–25 dBA keeps operation quiet under load
  • 63 CFM at 600–1600 RPM delivers strong cooling headroom
  • Dual-ball bearing ensures long-term reliability in white 3-pack

Three-Pack Reverse Airflow Fans

This set contains three 120 mm case fans built with a reverse airflow design that pushes air in the opposite direction to standard fans. Each unit uses a 2-ball bearing and runs between 600 and 1600 RPM, delivering 63 CFM at a noise level of 20 to 25 dBA. The white frame and infinity mirror ARGB lighting suit builders who want coordinated cooling and visual impact in a single purchase.

Addressable RGB And PWM Control

The fans connect via 5 V 3-pin addressable RGB headers, allowing per-LED colour and effect customisation through compatible motherboard software. A 4-pin PWM function enables automatic speed adjustment across the 600 to 1600 RPM range so cooling matches thermal load without manual intervention. No separate lighting controller is included, so the system must provide its own 5 V ARGB and PWM headers for full functionality.

White Frame Infinity Mirror Build

Each fan measures 120 by 120 by 25 mm with a white plastic frame and translucent blades that create the infinity mirror illusion when lit. The 3-pin power connector fits standard motherboard or fan hub headers, and the 25 mm thickness matches typical 120 mm mounting points on radiators and case panels. Buyers who need a dedicated hardware controller or fans thicker than 25 mm will not be served by this kit.

أبرز المميزات

  • Reverse airflow directs air efficiently through tight builds
  • Infinity mirror ARGB lighting creates vivid visual depth
  • 20–25 dBA keeps operation quiet under load
  • 63 CFM at 600–1600 RPM delivers strong cooling headroom
  • Dual-ball bearing ensures long-term reliability in white 3-pack

المواصفات

BrandPANO-MOUNTS
Fan Size120mm
LEDARGB
TypeCase Fan
Bearing Type2 Ball
RPM600-1600RPM
Air Flow63CFM
Noise Level20 - 25 dBA
Power Connector3 Pin
ColorWhite
CompatibilityCase
Fan Counts3 Fans
Fan ControllerNo Controller
Fan Thickness25mm
FeaturesReverse Airflow
Dimensions120×120×25mm 4.72*4.72*0.98in

أسئلة حول هذا المنتج

How often will the 2 ball bearings in these 120mm fans need replacement under normal use?

The 2 ball bearing design is rated for long service life and typically does not require scheduled replacement during the normal lifespan of the fans.

At 1600 RPM maximum speed, what thermal limit is reached first during sustained load?

The fans move 63 CFM at up to 1600 RPM; the practical limit is the case's ability to exhaust that airflow rather than the fans themselves.

What noise and heat output should I expect when all three white fans run continuously at full PWM speed?

At 1600 RPM each fan produces 20 to 25 dBA; combined noise is slightly higher, while motor heat remains minimal and does not affect case temperatures.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.