partaker Fanless Industrial PC Celeron 2955U 8GB DDR3 256GB SSD 1TB HDD
- Nettop Computer
- Black
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
partaker
12.1-inch IP65-rated industrial panel PC with Intel Celeron J6412, 16GB DDR4, 256GB SSD and high-temperature resistive touchscreen
Memory Capacity 16GB DDR4
SSD 256GB
HDD None
This 12.1 inch TFT LED all-in-one unit combines an Intel Celeron J6412 processor with 16 GB DDR4 memory and a 256 GB SATA SSD. The front panel meets IP65 protection and uses a high-temperature 5-wire resistive touchscreen rated for 200 million touches. Windows 10 Pro is pre-installed on the fanless aluminium chassis.
The VESA 75 mount, dual LAN, three COM ports and four USB 3.0 ports fit factory automation and self-service terminals. Buyers who need a higher-resolution display or a processor above the J6412 class should consider other platforms. The 0 °C to 50 °C operating range with SSD limits use in extreme cold or heat.
The 12.1 inch panel delivers 1024 by 768 resolution with 80-degree viewing angles in all directions and a minimum 30,000-hour backlight life. This fixed specification determines whether the screen fits the operator's visibility and durability requirements.
| Model | A2-PA-121TPC-CE5B(J64)-16G256G |
|---|---|
| Form Factor | All-in-One |
| Color | Silver |
| Operating System | Windows 10 Pro |
| CPU Type | Celeron |
| CPU Name | 2.00GHz |
| GPU/VGA Type | Intel UHD Graphics |
| Memory Capacity | 16GB DDR4 |
| SSD | 256GB |
| HDD | No |
| Screen Size | 12.1" |
| Touchscreen | Yes |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The panel requires a 301 x 229 mm opening hole for embedded mounting.
The rear VESA 75 bracket accepts standard M4 screws on a 75 x 75 mm pitch.
The 5-wire resistive screen is rated for 200 million touches; recalibration is only needed if drift appears.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟