Partaker GF2 barebone mini PC i3-5005U 8GB 128GB
- Black
- Intel Core i3 5th G…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
partaker
A compact Windows 11 Pro mini PC with an Intel Core i3 5005U, 8 GB DDR3L and a 128 GB sata drive, offering dual HDMI 1.4, VGA, Type-C.
CPU Type Intel Core i3-5005U
Group 8GB / 128GB SSD
The Partaker GF1 is a new mini PC barebone built around an Intel Core i3 5005U dual-core processor running at 2.00 GHz with a 15 W TDP. It ships with 8 GB of DDR3L memory in two SO-DIMM slots and a 128 GB mSATA SSD, while a second 2.5-inch SATA bay remains open for extra storage. Windows 11 Pro 64-bit comes pre-installed, and the fan-cooled aluminium chassis measures 133.8 x 126.6 x 47 mm.
The dual HDMI 1.4 ports plus VGA support triple independent displays at up to 2560 x 1600 @ 60 Hz, making the unit well suited for digital signage, kiosks or multi-monitor office desks. Dual Realtek 2.5 GbE LAN ports with PXE boot and Wake-on-LAN simplify managed rollouts. Buyers who need more than 16 GB of total memory or who require a discrete graphics engine should look at a larger platform.
Two SO-DIMM slots accept DDR3L-1333/1600 modules up to a combined 16 GB, so the 8 GB fitted today can be doubled but not exceeded. This limit decides whether the GF1 can handle your workload or whether you need a system with higher memory capacity.
| Color | Black |
|---|---|
| CPU Type | Intel Core i3 5th Gen |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Each HDMI 1.4 port supports up to 2560 x 1600 at 60 Hz, so two monitors at that resolution run simultaneously.
The unit measures 133.8 x 126.6 x 47 mm and ships with a VESA mount that attaches to the rear using the supplied screws.
Open the chassis, slide the drive into the internal bay, connect the SATA data and power cables, then secure it with the provided screws before closing the case.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟