Phanteks PH-F140SK_DRGB_PWM 140mm case fan
- 1 Fan
- No Controller
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Phanteks
Three white 120 mm case fans with nine-blade design, 50 CFM airflow and addressable RGB lighting
Fan Size 120mm
Option 3 Packs
This three-pack contains three 120 mm case fans with white frames and digital RGB lighting. Each unit uses a nine-blade design driven by a rifle bearing to deliver 50 CFM airflow. Speed is adjustable from 500 to 1500 RPM via the 4-pin PWM connector. The fans operate at 25.5 dB(A) and include rubber dampening pads to reduce vibration.
The kit suits builders who want matching white fans with addressable lighting that syncs with Phanteks DRGB products and compatible motherboard headers. It includes a DRGB adapter cable and a 4-pin fan cable for direct connection. Buyers who need a dedicated hardware controller in the box or who prefer fans without any lighting should consider other options.
The nine-blade impeller moves 50 CFM while the rifle bearing keeps noise to 25.5 dB(A) across the 500–1500 RPM range. This balance decides whether the fans meet a specific cooling target without exceeding a noise budget. The 4-pin PWM connector allows the motherboard to tune the curve precisely for each chassis layout.
| Brand | Phanteks |
|---|---|
| Model | PH-F120SK_DRGB_PWM_WT01_3P |
| Fan Counts | 3 Fans |
| Fan Controller | No Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Rifle |
| RPM | 500~1500 + 5% -10% RPM |
| Air Flow | 50 CFM |
| Noise Level | 25.5 dB(A) |
| Power Connector | 4 Pin |
| Color | White |
| LED | RGB |
| Dimensions | 120.00 x 120.00 x 25.00 mm |
| Package Contents | 12x Fan Screws 3x PH-F120SK_DRGB_PWM 24x Rubber Pad 1x PH-CB-DRGB3P_MB 1x PH-CB-F4P |
| وزن الشحنة | 0.51 kg |
| أبعاد الطرد | 178 × 127 × 83 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Use your motherboard BIOS or fan-control software to verify each fan runs between 500 and 1500 RPM under load.
The pack contains 12 fan screws, 24 rubber dampening pads, a 3-pin DRGB motherboard cable and a 4-pin PWM fan cable; you only need a 4-pin PWM header and a 3-pin 5 V DRGB header on the motherboard.
Choose this 3-pack if you want white 120 mm fans with addressable DRGB sync, 50 CFM airflow at 25.5 dB(A) and rifle-bearing reliability; no other colour or LED variants exist in this SKU.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟