نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Clear PVC soft tube coil 16mm OD 10mm ID 3m

Phanteks

Phanteks PH-GEF_ST16_CL 16x10mm Clear PVC Soft Tube 3m diy cooling

SKU CH-EJ7T-BEW7X MPN PH-GEF_ST16_CL

Clear PVC soft tubing, 3 metres long with 10 mm inner and 16 mm outer diameter, for custom water-cooling loops

  • TypeSoft tube
  • Tube Dim.3 meter
  • Tube MaterialPVC
  • Package ContentsPH-GEF_ST16_CL 1x
  • Crystal-clear PVC shows off your coolant loop
  • Smooth inner walls resist bacterial build-up for clean flow
  • 3 metre length gives plenty of room for custom routing
  • 10 mm inner and 16 mm outer diameter fits standard fittings
  • Ready-to-use soft tube for DIY water-cooling builds

Phanteks Glacier EZ-Fit 16 Soft Tube

This Phanteks soft tube is made from clear PVC and measures three metres in length. It suits builders assembling a custom water-cooling loop who want a transparent finish to display coolant colour. The 16mm outer diameter and 10mm inner diameter match common compression-fitting sizes. The material arrives ready to cut and route inside the case.

Crystal-Clear PVC Construction

High-quality PVC gives a crystal-clear appearance that shows fluid movement through the loop. Smooth inner walls reduce sites where bacteria can adhere, helping maintain cleaner coolant flow over time. The tubing remains flexible enough for tight bends without kinking when cut to length. Three metres provides generous length for most single-loop builds.

Upgrade from Opaque or Short Tubing

This tube replaces shorter or coloured tubing that limits loop layout or hides the fluid. The extra length supports complex routing around large graphics cards or multiple radiators. Builders who need more than three metres or prefer rigid acrylic or PETG tubing will not be served by this product. It is a direct fit for existing 16mm OD fittings without adapters.

أبرز المميزات

  • Crystal-clear PVC shows off your coolant loop
  • Smooth inner walls resist bacterial build-up for clean flow
  • 3 metre length gives plenty of room for custom routing
  • 10 mm inner and 16 mm outer diameter fits standard fittings
  • Ready-to-use soft tube for DIY water-cooling builds

المواصفات

BrandPhanteks
ModelPH-GEF_ST16_CL
TypeSoft tube
Tube Dim.3 meter
Tube MaterialPVC
Package ContentsPH-GEF_ST16_CL 1x
وزن الشحنة0.73 kg
أبعاد الطرد254 × 229 × 38 mm

أسئلة حول هذا المنتج

What are the inner and outer diameters of the Phanteks PH-GEF_ST16_CL tube?

The tube has a 10 mm inner diameter and a 16 mm outer diameter, matching 3/8" ID and 5/8" OD fittings.

How much tubing is included and what is its length?

The package contains one 3 meter length of clear PVC soft tube.

What tools or steps are needed to install this tubing?

Cut the tube to length with a sharp blade, then push it firmly over barbed fittings until it seats past the barb ridge.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.