Phanteks PH-PGPUKT5.0_DWT01 vertical GPU bracket PCIe 5.0 220 mm white
- Dimension (WxHxD) 3…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Phanteks
Mounts graphics cards vertically or tilted up to 30 degrees with PCIe 5.0 support and integrated D-RGB lighting
Option Gen5 Black
الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.
The Phanteks Premium Gen5 Vertical GPU Bracket mounts a graphics card vertically inside a chassis that provides seven open PCI slot positions. It connects through a PCIe x16 Gen5.0 link so the card runs at full bandwidth. Integrated D-RGB lighting adds a diffused glow along the bracket. The steel and ABS frame measures 347 by 146 by 141 millimetres and comes in black.
This bracket suits enthusiasts who want to display a heavy graphics card vertically or tilted up to 30 degrees while keeping Gen5 signal integrity. It requires a case with seven clear expansion slots, so compact or mini-ITX builds that lack that clearance cannot use it. Systems that must keep the card in the standard horizontal position will not benefit from this accessory.
The single specification that decides fit is the PCIe x16 Gen5.0 interface, which preserves the graphics card's maximum data rate when mounted vertically. If the platform or riser cable is limited to an earlier generation, the bracket will still install but the link will negotiate down, so buyers needing full Gen5 throughput must verify their motherboard and cable match this standard.
| Brand | Phanteks |
|---|---|
| Model | PH-PGPUKT5.0_DBK01 |
| Color | Black |
| Specifications | Dimension (WxHxD) 347x146x141 mm / 13.66 x 5.75 x 5.55 inches Material Powder coated steel, ABS plastic Chassis Support Chassis with 7 open PCI slot area PCIe generation PCIex16 Gen5.0 GPU thickness support unrestricted GPU length support 365mm GPU tilt angle support Vertical, tilt 15 to 30 degrees LED lighting D-RGB LED Strip, 15 LED chips LED max power draw 0.20A |
| وزن الشحنة | 1.29 kg |
| أبعاد الطرد | 356 × 188 × 168 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The bracket uses a full PCIe x16 Gen5.0 connection so the GPU keeps its native bandwidth even during sustained workloads.
The powder-coated steel frame and open design add no active cooling components, so thermals and acoustics stay the same as a standard horizontal mount.
Yes, the bracket is made for chassis with seven open PCI slots and includes the mounting hardware needed for installation.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟