نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green PCB add-on card with passive heatsink and RJ45 BNC connectors

PNY Technologies, Inc.

PNY Technologies, Inc. Quadro SYNC Option Card VCQKQUADROSYNC-KIT for K5000 K5200

SKU CH-48YC-0JYS6

Synchronizes up to four Kepler GPUs and sixteen displays with passive cooling and 12 W power draw

  • TypeController Card
  • Synchronise up to four Kepler GPUs across sixteen displays
  • Eliminate imaging artifacts on video walls without performance loss
  • Align inputs for 4K multi-input projectors or panels
  • Enable accurate stereoscopic 3D across multiple systems
  • Lock displays to an external timing source via Genlock

Quadro SYNC for K5000 and K5200

The PNY Quadro SYNC option card adds frame-lock and genlock capability to compatible NVIDIA Kepler GPUs. It connects to a single PCIe x1 slot and draws up to 12 W through a 6-pin or SATA power cable. The passive board supports up to four graphics cards and 16 displays per system. It enables pixel-accurate video walls and stereoscopic 3D across multiple projectors.

Visualisation labs and multi-projector installations

This card suits engineers building tiled display walls, CAVE environments or broadcast walls that require locked refresh across every output. It is not for buyers who need GPU compute acceleration, additional video memory or consumer gaming features. It also does not serve systems that lack a supported Kepler Quadro card or an empty PCIe x1 slot.

Check GPU compatibility and slot space

Verify that the host system contains a Quadro K5000 or K5200 and a free PCIe x1 expansion slot. Confirm the power supply has a spare 6-pin or SATA connector for the board. Ensure the chassis airflow can dissipate 12 W from a passive heatsink without active cooling. Cable routing for RJ-45 and BNC frame-lock links should be planned before installation.

أبرز المميزات

  • Synchronise up to four Kepler GPUs across sixteen displays
  • Eliminate imaging artifacts on video walls without performance loss
  • Align inputs for 4K multi-input projectors or panels
  • Enable accurate stereoscopic 3D across multiple systems
  • Lock displays to an external timing source via Genlock

المواصفات

TypeController Card

أسئلة حول هذا المنتج

Which NVIDIA GPUs must already be installed for the Quadro Sync board to synchronise displays?

The board synchronises up to four NVIDIA Kepler architecture-based GPUs, specifically the Quadro K5000 or K5200 models.

Can the card share a system with older non-Kepler GPUs that remain in the chassis?

The Sync board only controls Kepler-based K5000 or K5200 GPUs; other GPUs in the same system will not be synchronised by this card.

How can I verify the board is actively locking frames across the video wall after installation?

When frame lock is engaged the RJ-45 and BNC Genlock LEDs show a steady sync signal and NVIDIA Mosaic reports all displays running at a common refresh rate.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.