نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Bronze metallic PLA+ filament spool, 1.75 mm, 1 kg net weight

PrintOxe

PrintOxe PLA+ Pro Bronze 1.75mm 1Kg 3D printer filament

SKU CH-FFGN-DKAVJ

Bronze PLA+ filament with ±.03 mm accuracy, 1.75 mm diameter, 190–200 °C print range, and vacuum-sealed 1 kg spool for moisture protection

  • TypeFilament
  • Bronze metallic finish for striking visual models
  • ±0.03 mm dimensional accuracy for precise extrusion
  • Vacuum-sealed with desiccant to prevent moisture absorption
  • 190 – 200 °C nozzle range suits most FDM printers
  • 1 kg net weight on standard 20 cm spool

Bronze PLA+ filament for FDM printers

This 1.75 mm PLA+ Pro filament comes in a bronze metal colour and is wound on a 1 kg spool. It targets hobbyists and small workshops that want a decorative metallic finish without printing actual metal composites. The material is vacuum-sealed with desiccant to resist moisture during storage.

Upgrade from standard PLA when strength matters

The PLA+ formulation delivers extra strength and lower shrinkage compared with basic PLA, so it reduces warping and improves layer adhesion on larger prints. Switch when you need tougher functional parts or smoother surfaces on detailed models, but stay with standard PLA for quick drafts where cost is the only driver.

Practical limits of 1.75 mm PLA+

Dimensional accuracy is held to ±0.03 mm, which keeps extrusion consistent on most Bowden and direct-drive systems. The recommended nozzle window of 190 °C to 200 °C (374 °F to 392 °F) is narrow, so printers without reliable PID tuning may show temperature-related artefacts. The spool hub measures 5.59 cm, so check holder compatibility before buying.

أبرز المميزات

  • Bronze metallic finish for striking visual models
  • ±0.03 mm dimensional accuracy for precise extrusion
  • Vacuum-sealed with desiccant to prevent moisture absorption
  • 190 – 200 °C nozzle range suits most FDM printers
  • 1 kg net weight on standard 20 cm spool

المواصفات

BrandPrintOxe
ModelPLA+ / PLA Pro
TypeFilament

أسئلة حول هذا المنتج

Will the 7.88 inch spool diameter and 2.20 inch hub hole fit my printer's filament holder?

The spool measures 7.88 inches in diameter, 2.69 inches wide, with a 2.20 inch hub hole. Verify your holder accepts these dimensions before mounting.

What nozzle temperature should I set for the 1.75 mm PLA+ Pro filament, and what common mistake causes clogs?

Set the nozzle between 190°C and 200°C. A frequent error is printing too cold, which leads to under-extrusion and nozzle clogs.

How should I store the 1 kg spool after opening to prevent moisture absorption?

Keep the filament in a sealed container with desiccant when not printing. The vacuum-sealed packaging includes desiccant for initial protection.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.