OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Replace Power
A 420 watt ATX power supply with reduced depth for HP desktops, offering 24-pin, 4-pin, SATA and Molex connectors
This unit replaces the original power supply in HP A376x, A384x, A387x, A400n, A400y, A404x, A405n and A406x systems. It fits a standard ATX slot with a reduced depth of 5.86 inches for tighter chassis clearance. The grey housing holds a single 80mm fan and ships new. Builders restoring these specific HP models will find the connector set matches the factory layout.
The label states a max wattage of 420 watts and a total continuous wattage of 280 watts. Hold-up time is rated at a minimum of 17 ms at nominal input, while rise time stays below 70 ms. Low ripple and noise are specified across the +5V, -5V, +12V1, +12V2, +3.3V, -12V and +5V-SB rails. AC input covers 110/220V at 47 to 63 Hz for global mains compatibility.
This supply replaces a failed or noisy OEM unit in the listed HP desktops without requiring adapter cables. The fixed cabling provides one 24 (20+4) pin motherboard connector, one 4-pin CPU connector, three SATA 15-pin connectors, two Molex 4-pin connectors and one floppy 4-pin connector. It does not suit builds needing PCIe power cables, higher continuous wattage or modular cabling.
| Brand | Replace Power |
|---|---|
| Model | HP A376x A384x A387x A400n A400y A404x A405n A406x |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 4 |
The 80 mm fan provides stable cooling for long-life performance while the unit maintains low ripple and noise under load.
It requires a standard ATX motherboard socket for the 20+4 pin connector and a 4-pin CPU power header; all SATA, Molex and floppy leads are built into the supply.
Yes, the shorter 5.86 inch depth is designed for increased compatibility with those HP models and standard ATX slots.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟