OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Replace Power
300 W ATX unit with 20+4-pin, 4-pin CPU, three SATA, two peripheral and one floppy connector for Dell Inspiron 518, 537, 545
This 300 W ATX unit replaces the original power supply in Dell Inspiron 518 537 and 545 desktops. It delivers the standard voltages those systems expect without modification. The grey enclosure fits the existing chassis mounting points. Builders restoring or repairing these models can install it directly.
The harness provides one 20+4 pin ATX connector, one 4 pin ATX12V connector, two peripheral connectors, one floppy connector and three SATA power connectors. No PCIe power leads are present so discrete graphics cards requiring auxiliary power cannot be used. The fixed cable count also restricts the number of drives and peripherals that can be powered simultaneously.
A single fan handles thermal management for the 300 W output. The lightweight construction at 0.1 kg eases handling during installation. Standard ATX screw spacing aligns with common chassis mounts. Grey finish matches typical office chassis aesthetics. The connector mix reflects the needs of legacy Dell workstations rather than modern high-density builds.
| Brand | Replace Power |
|---|---|
| Model | AP-MPS3ATX30-12 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
Choose this 300 W unit if your Dell Inspiron 518, 537 or 545 originally shipped with a 300 W supply; it matches the factory rating and connector layout.
It provides up to 300 W of steady power across the 20+4-pin ATX, 4-pin ATX12V, two peripheral, one floppy and three SATA connectors for the original components.
Yes, the 20+4-pin ATX and 4-pin ATX12V connectors match the standard ATX layout used in the Inspiron 518, 537 and 545 boards.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟