EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Replace Power
A 300W ATX power module with one fan, 20+4-pin ATX, 4-pin ATX12V, two peripheral, one floppy and three SATA connectors
This Replace Power unit is a direct 300W ATX replacement for Delta DPS-300PB1A, DPS-300PB, DPS-340BB and GPS-300AB-200D models. It fits standard ATX bays and suits builders restoring older office or small-form-factor desktops. A single fan provides cooling in a grey chassis. The module delivers steady power for basic system operation.
The supply uses a 20+4-pin main connector and a single 4-pin ATX12V connector for the motherboard. Peripheral power comes from two standard peripheral connectors and one floppy drive connector. Three SATA power connectors are available for drives. No PCIe or additional 12V connectors are present, so discrete graphics cards cannot be powered.
With 300W total output the unit comfortably runs a CPU, integrated graphics, three SATA drives and a few USB peripherals. It runs out of headroom when a dedicated graphics card or many spinning drives are added. The 4-pin 12V rail limits CPU power delivery, making high-TDP processors unsuitable. Over-voltage protection guards connected components.
| Brand | Replace Power |
|---|---|
| Model | AP-MPS3ATX30-32 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
The AP-MPS3ATX30-32 is built as a direct replacement for Delta DPS-300PB1A, DPS-300PB, DPS-340BB and GPS-300AB-200D units used in various desktop systems.
It supplies a steady 300W through a 20+4-pin ATX connector, a 4-pin ATX12V connector, three SATA connectors, two peripheral connectors and one floppy connector.
The 20+4-pin ATX connector fits standard ATX motherboards and caps the board power to the unit's 300W total output.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟