OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Replace Power
A 400 W ATX power supply with 20+4 pin, 4 pin 12 V, three SATA 15 pin, two Molex and one floppy connector, measuring 5.8 x 3.37 and weighing .1
This 400 W ATX power supply is a direct replacement for the Wintech WIN-400PS unit. It fits standard ATX cases and supports both 20-pin and 24-pin motherboards via the included 20+4 pin connector. The unit is aimed at users repairing older desktops or building basic systems that require reliable power delivery.
The supply delivers 400 W total output with a single cooling fan. It provides one 24-pin ATX connector, one 4-pin P4 12 V connector, three SATA 15-pin connectors, two Molex 4-pin connectors and one floppy 4-pin connector. This covers a typical motherboard, CPU power, multiple drives and legacy peripherals. Systems needing more than three SATA devices or additional PCIe power will exceed the available leads.
The included cable set adds three SATA power plugs for current hard drives or SSDs, two Molex plugs for older devices and a floppy connector for very old hardware. The 20+4 pin motherboard cable works with both 20-pin and 24-pin boards, while the 4-pin P4 connector supplies dedicated CPU power. No modular cables or software utilities are included.
| Brand | Replace Power |
|---|---|
| Model | RPSU-C95-1 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
Yes, the 20+4 pin ATX connector splits so the extra four pins can be left disconnected, making it compatible with both 20-pin and 24-pin motherboards.
The single fan should spin up immediately on power-on and the system should POST without unexpected shutdowns, indicating the 400 W output and protection circuits are functioning.
The unit ships with a fixed 20+4 pin ATX, one 4-pin P4-12V, three SATA 15-pin, two Molex 4-pin and one floppy 4-pin connector; no modular cables are included so any additional adapters must be bought separately.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟