نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Grey ATX power supply unit with 80mm fan and multiple cable connectors

Replace Power

Replace Power RPSU-C99-20 420W ATX power supply

SKU CH-DXW0-FVN91 MPN RPSU-C99-20

A 420W ATX power supply with switchable 110V and 220V input, an 80mm fan, and SATA, 20+4 pin ATX, 12V ATX and Molex connectors for compatible HP Media Center desktops

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight0.1
  • Reliable 420W output powers HP Media Center systems
  • Switchable 110V and 220V input suits global mains voltage
  • 80mm fan cools the unit during operation
  • 20+4 pin ATX connector fits both 20-pin and 24-pin motherboards
  • Includes SATA, Molex and 12V ATX connectors for drives and peripherals

Replacement for HP Media Center

The Replace Power RPSU-C99-20 is a 420W ATX power supply designed as a direct replacement for specific HP Media Center desktops including the m1180n m1270n m1820n m1195c m1264n and m1265c models. It accepts switchable 110V or 220V input and uses an 80mm fan for cooling. Grey in colour and weighing 0.1, it targets owners of those legacy systems needing a functional unit.

Capacity and headroom for legacy builds

At 420W this unit comfortably handles the original components found in the listed HP Media Center chassis such as period processors integrated graphics and a modest drive count. The single 12V rail and combined output limit headroom for modern discrete graphics cards or high core count CPU upgrades. It runs out when a build demands sustained loads above its rated maximum or requires additional PCIe power connectors not present.

Connector mix and upgrade limits

The harness includes a 15 inch SATA connector a 14 inch 20 plus 24 pin ATX motherboard connector a 14 inch 12V ATX connector two 15 inch large peripheral connectors two 6 inch large peripheral connectors and one 6 inch small peripheral connector. This covers the factory devices in the target models. The jump is worth it when the original supply has failed or shows instability. It is not for builders who need dedicated PCIe power for a graphics card or more SATA ports than the single provided connection.

أبرز المميزات

  • Reliable 420W output powers HP Media Center systems
  • Switchable 110V and 220V input suits global mains voltage
  • 80mm fan cools the unit during operation
  • 20+4 pin ATX connector fits both 20-pin and 24-pin motherboards
  • Includes SATA, Molex and 12V ATX connectors for drives and peripherals

المواصفات

BrandReplace Power
ModelRPSU-C99-20
ColorGrey
TypeATX
Fans1
Weight0.1

أسئلة حول هذا المنتج

Will the RPSU-C99-20 fit my older HP Media Center m1180n without modifying the case?

Yes, the unit is built as a direct replacement for the HP Media Center m1180n, m1270n, m1820n, m1195c, m1264n and m1265c models and uses the standard ATX form factor.

How can I verify the 80 mm fan is spinning correctly after I install the supply?

Power on the system and listen for the 80 mm fan; airflow should be felt at the rear grille and the PSU should stay cool under load.

Which cables come attached to the RPSU-C99-20 and what must I source separately?

The box includes one 15-inch SATA connector, one 14-inch 20+4 pin ATX connector, one 14-inch 12V ATX connector, two 15-inch and two 6-inch large power connectors, plus one 6-inch small power connector; no extra cables are required for a typical HP Media Center rebuild.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.