NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Replace Power
A 420 W ATX power supply with reduced depth, built-in 20+4 pin adapter and multiple protection circuits for HP Compaq and eMachine systems
This 420 watt ATX unit replaces several older HP Compaq and eMachine power supplies including the HIPRO HP-D2537F3R and HP-D3057F3R models. It is designed for owners of legacy desktops who need a direct swap without modifying the case or wiring. The reduced depth improves fit in compact chassis where standard length units would interfere with drive cages or motherboard headers.
A single 20+4 pin connector supports both 20 pin and 24 pin motherboard headers, removing the need for a separate adapter. The supply also provides one P4 12V four-pin connector, three SATA power connectors, three LP4 four-pin connectors and one floppy four-pin connector for older peripherals. Dual +12V rails each deliver 8A while the +3.3V and +5V rails supply 11A and 12A respectively.
Measuring 5.9 inches wide by 3.4 inches high by 4 inches deep, the unit fits standard ATX mounting holes while leaving extra clearance behind the motherboard tray. It operates on 110 to 260 volt AC input with a manual voltage selector and includes over-current, over-power, over-voltage and short-circuit protection. A single internal fan cools the unit across an operating range of 0 to 50 degrees Celsius at full load.
| Brand | Replace Power |
|---|---|
| Model | RPSU-D2537F3R |
| Type | ATX |
| Fans | 1 |
| Weight | 1.5 |
The unit supplies up to 420 watts total with +12V rails rated at 8A each, +5V at 12A, +3.3V at 11A, -12V at 0.3A and +5VSB at 2A.
The single 20+4 pin connector mates with both 24-pin and 20-pin ATX motherboards, and a separate 4-pin P4 12V connector is included for CPU power.
At 5.9" wide, 3.4" high and 4" deep the supply matches the ATX form factor while the shorter depth clears tight legacy cases such as the listed HP and eMachine models.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟