SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Seagate
Enterprise SAS drive with 1 TB capacity, 7200 RPM speed, 64 MB cache and 4.16 ms latency for 24×7 nearline storage
The Seagate Constellation ES ST1000NM0001 is a 1TB 3.5" internal hard drive built for 24×7 enterprise storage workloads. It spins at 7200 RPM with a 64MB cache and connects through a SAS 6Gb/s interface. The drive is supplied as a bare unit in new condition.
This drive suits arrays, servers and storage appliances that accept a 3.5" SAS device. Buyers whose systems only provide a different interface cannot use it. The supplier notes the drive health will be no lower than 90 percent and that it has been erased to a DoD 5220.22 M compliant standard. Manufacturer warranty has ended.
The single specification that determines whether this is the right part is the SAS 6Gb/s interface. Your host controller or backplane must support SAS at that speed for the drive to function.
| Brand | Seagate |
|---|---|
| Series | Constellation ES |
| Model | ST1000NM0001 |
| Packaging | Bare Drive |
| Interface | SAS 6Gb/s |
| Capacity | 1TB |
| RPM | 7200 RPM |
| Cache | 64MB |
| Average Latency | 4.16ms |
| Features | Important Warranty Information This product is end-of-sale and no longer warranted by the manufacturer. Instead, warranties this product for one year from date of purchase. If you require warranty service after thirty days, please contact Customer Service, not the manufacturer. Reduces design and support costs by building on the Seagate best-in-class enterprise storage foundation Features a range of high capacities in a 3.5-inch enterprise-class hard disk drive Offers a traditional 3.5-inch form factor with enhanced rotational vibration tolerance and high data integrity for enterpris |
| Usage | For Enterprise Storage |
| Form Factor | 3.5" |
| وزن الشحنة | 1.36 kg |
| أبعاد الطرد | 171 × 133 × 32 mm |
Yes, the 3.5" form factor matches standard enterprise drive bays and the SAS interface connects directly to a compatible backplane or controller.
Insert the drive into a hot-swap bay or caddy, ensure the SAS connector seats firmly, and configure the drive in the RAID controller BIOS before use.
Use a DoD 5220.22 M compliant erase tool to overwrite all 1TB of capacity, then verify drive health remains at or above 90%.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟