Seagate Nytro 1351 XA1920LE10063 1.92TB 2.5" SATA enterprise SSD
- 2.5"
- 1.92TB
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Seagate
960GB 2.5" SATA enterprise SSD with 560MB/s read, 535MB/s write, 90,000/55,000 IOPS and 2,000,000h MTBF
Options 960GB
The Seagate Nytro 1351 is a 2.5-inch enterprise SSD built for data centre and cloud server deployments. It uses 3D TLC NAND and a SATA 6Gb/s interface to integrate with existing storage infrastructures without new hardware investment. The drive targets read-intensive and mixed workloads such as web servers, tiered storage analytics and OLTP databases. It is rated for 1 DWPD endurance and 1750TB total bytes written.
DuraWrite lossless data reduction technology helps maintain fast, consistent throughput during extended operation rather than only in short bursts. Sequential speeds reach up to 560 MBps read and 535 MBps write, while random performance delivers up to 90,000 read IOPS and 55,000 write IOPS. Read latency is 155 us and write latency is 40 us. Active power draw is 3.2W and idle power is 1.2W, supporting 247 operation with lower cooling cost.
The 1 DWPD and 1750TB TBW rating determines whether this drive matches the workload. It fits applications that prioritise cost-effective read performance over heavy write cycles. Buyers needing higher write endurance for write-heavy databases or logging should consider a different endurance class. The SATA interface ensures broad compatibility with legacy backplanes and controllers.
| Brand | Seagate |
|---|---|
| Series | Nytro 1351 |
| Model | XA960LE10063 |
| Form Factor | 2.5" |
| Capacity | 960GB |
| Memory Components | 3D TLC |
| Interface | SATA III |
| Max Sequential Read | Up to 560 MBps |
| Max Sequential Write | Up to 535 MBps |
| 4KB Random Read | Up to 90,000 IOPS |
| 4KB Random Write | Up to 55,000 IOPS |
| Read Latency | 155 us |
| Write Latency | 40 us |
| MTBF | 2,000,000 hours |
| Features | SATA 6Gb/s interface for easy deploymentSeagate DuraWrite lossless data reduction technologyTunable capacity for performance- or capacity-optimised SSD solutionsSeagate Secure optionsPower loss data protection circuitEnterprise-class reliability with 2M-hr. MTBFBest-Fit Applications:Public and private cloudWeb serversTiered storage analyticsDatabases (OLTP) |
| Power Consumption (Idle) | 1.2W |
| Power Consumption (Active) | 3.2W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1000G |
| Height | 7.00mm |
| Width | 70.10mm |
| Depth | 100.25mm |
| Weight | 77.00g |
| وزن الشحنة | 0.07 kg |
| أبعاد الطرد | 102 × 69 × 5 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The drive uses 1.2W at idle and 3.2W during active operation, keeping heat output low for continuous use.
Yes, the 2.5-inch SATA interface uses the same +5V and +12V rails as any enterprise SATA bay, so no extra cabling is needed.
It shares the SATA 6Gb/s interface, so it will negotiate the same link speed and operate alongside legacy rotational drives without configuration changes.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟