نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Silver 3.5-inch bare hard drive with green circuit board visible underneath

Seagate

Seagate ST4000NM0125 4TB 7200 RPM 512e SAS 128MB 3.5" internal hard drive

SKU CH-1FYR-4DM71 MPN ST4000NM0125

A 4 TB enterprise hard drive with 7200 RPM, 128 MB cache and 12 Gb/s SAS for 24×7 bulk-data workloads

  • PackagingBare Drive
  • Interface512e SAS
  • Capacity4TB
  • NAND Flash Memory TypeHard Drive
  • RPM7200 RPM
  • Cache128MB

Options 4TB

الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.

  • 4TB capacity stores bulk enterprise data
  • 7200 RPM spindle delivers consistent nearline performance
  • 128 MB cache accelerates random I/O workloads
  • 12 Gb/s SAS interface enables dual-port redundancy
  • 550 TB/year workload rating supports 24×7 operation

Capacity and Interface

This 4 TB enterprise hard drive uses a 12 Gb/s SAS interface with 512e formatting and conventional magnetic recording technology. It is built for 24×7 bulk-data workloads such as replicated storage servers, RAID arrays and high-capacity nearline archives.

Host Compatibility

Verify that your server or storage enclosure provides a SAS 12 Gb/s backplane or controller with 512e sector support. The drive requires a standard 3.5-inch drive bay and draws power from the system backplane rather than a separate connector.

Thermals and Power

The drive is engineered for continuous operation in dense multi-drive chassis with a rated workload of 550 TB per year. Dual processors, ramp-load technology and a humidity sensor maintain stable performance and reliability under sustained enterprise loads.

أبرز المميزات

  • 4TB capacity stores bulk enterprise data
  • 7200 RPM spindle delivers consistent nearline performance
  • 128 MB cache accelerates random I/O workloads
  • 12 Gb/s SAS interface enables dual-port redundancy
  • 550 TB/year workload rating supports 24×7 operation

المواصفات

BrandSeagate
ModelST4000NM0125
PackagingBare Drive
Interface512e SAS
Capacity4TB
NAND Flash Memory TypeHard Drive
RPM7200 RPM
Cache128MB
Average Latency4.16ms
FeaturesCapacity-Optimized Enterprise Hard Drive for Bulk-Data Applications
- 1TB to 8TB*1, 3.5-inch enterprise drive with industry-leading conventional magnetic recording (CMR) technology
- Advanced Write Caching feature enables up to 100% performance improvement in random writes over last-generation drive
- 12Gb/s SAS and SATA 6Gb/s interfaces in industry-standard formats (512n, 512e and 4Kn) for easy integration into replicated and RAID multi-drive storage servers and systems
- State-of-the-art cache, on-the-fly error-correction algorithms, super parity and end-to-end SAS-based data integ
UsageFor Enterprise Storage
Form Factor3.5"
Height (maximum)26.10mm
Width (maximum)101.85mm
Length (maximum)147.00mm
وزن الشحنة0.69 kg
أبعاد الطرد168 × 146 × 3 mm

إصدارات أخرى من هذا الطراز

2 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

What comes in the box with the ST4000NM0125, and do I need to buy cables or a mounting bracket separately?

The drive is supplied as a bare 3.5" unit only. A SAS data cable, a compatible power connector and any mounting hardware for your chassis must be sourced separately.

Should I choose the 512e SAS version or look for a 512n or 4Kn model for my RAID array?

The 512e format emulates 512-byte sectors on 4K physical sectors, giving broad compatibility with most RAID controllers and operating systems while keeping the 4TB capacity.

How does the 12Gb/s SAS interface and 7200 RPM speed translate to real-world throughput in a 24×7 server?

The 12Gb/s SAS link and 128MB cache support sustained sequential transfers that match the 7200 RPM mechanical limit, while the 550TB/yr workload rating and 4.16ms latency are engineered for continuous multi-drive operation.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.