SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Seagate
900 GB enterprise hard drive with 15 000 RPM SAS 12 Gb/s interface and 256 MB cache
This Seagate ST900MP0146 is a 900GB 3.5-inch internal hard drive built for enterprise storage workloads. It spins at 15000 RPM and connects through a SAS 12Gb/s interface with a 256MB cache. The drive is supplied as a bare unit in new condition. It targets servers and arrays that need sustained high-throughput performance.
The 15000 RPM spindle and SAS 12Gb/s link suit database clusters, virtualization hosts and other I/O-bound applications where low latency matters more than raw capacity. Buyers who need larger single-drive capacities or lower power draw should look at alternative form factors or speeds. This drive is not designed for desktop PCs or consumer NAS boxes that lack SAS controllers.
The single specification that determines compatibility is the SAS 12Gb/s interface. Your backplane, HBA or RAID controller must support this exact protocol and speed for the drive to function. No other interface or speed is supported by this model.
| Brand | Seagate |
|---|---|
| Model | ST900MP0146 |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 900GB |
| NAND Flash Memory Type | Hard Drive |
| RPM | 15000 RPM |
| Cache | 256MB |
| Usage | For Enterprise Storage |
| Form Factor | 3.5" |
| وزن الشحنة | 0.36 kg |
| أبعاد الطرد | 102 × 76 × 25 mm |
The SAS 12Gb/s interface provides up to 12 Gbit/s bandwidth, though real-world sustained transfer depends on the 15000 RPM platters and 256MB cache.
This drive fits a standard 3.5-inch internal bay and uses the industry-standard SAS connector for power and data.
Mount the bare drive in a 3.5-inch bay, attach the SAS data and power cables, then ensure the controller firmware recognises the 4Kn/512e sector format before partitioning.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟