نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green printed circuit board M.2 2280 SSD with black label and gold edge connector

Silicon Power

Silicon Power SP256GBP34A60M28 256GB internal SSD

SKU CH-TFYN-REHNG MPN SP256GBP34A60M28

M.2 2280 solid-state drive with 256GB capacity, PCIe 3.0 x4 interface, sequential read up to 2200 MBps and write up to 1600 MBps

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity256GB
  • Memory ComponentsTLC
  • InterfacePCI-Express 3.0 x4

Options 256GB

  • Faster boot-ups and application loads with PCIe Gen 3x4 read speeds up to 2,200 MB/s
  • Quicker file transfers and data saves with sequential write speeds up to 1,600 MB/s
  • Enhanced data integrity through LDPC error correction, ECC, End-To-End protection and RAID engine
  • Efficient performance via NVMe 1.3 support, Host Memory Buffer and SLC Cache technology
  • Compact M.2 2280 form factor fits modern laptops, desktops and small-form-factor PCs

P34A60 256GB NVMe SSD

The Silicon Power P34A60 is a 256GB internal solid state drive built for consumer laptops and desktops. It uses an M.2 2280 form factor and connects through a PCIe 3.0 x4 interface. The drive is designed to speed up boot times, application launches and file transfers in everyday systems.

Capacity and headroom

With 256GB of TLC flash the drive holds an operating system, core applications and a moderate media library. Sequential reads reach up to 2200 MBps and writes up to 1600 MBps, which is sufficient for typical workloads. Heavy video editing or large game libraries will exceed the available space before the interface saturates.

Thermals noise and power

The drive operates between 0°C and 70°C with no moving parts, so it runs silently. Power draw stays low thanks to NVMe 1.3 support, Host Memory Buffer and SLC Cache technology. LDPC ECC, End-To-End data protection and a RAID engine maintain data integrity during sustained use.

أبرز المميزات

  • Faster boot-ups and application loads with PCIe Gen 3x4 read speeds up to 2,200 MB/s
  • Quicker file transfers and data saves with sequential write speeds up to 1,600 MB/s
  • Enhanced data integrity through LDPC error correction, ECC, End-To-End protection and RAID engine
  • Efficient performance via NVMe 1.3 support, Host Memory Buffer and SLC Cache technology
  • Compact M.2 2280 form factor fits modern laptops, desktops and small-form-factor PCs

المواصفات

BrandSilicon Power
SeriesP34A60
ModelSP256GBP34A60M28
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity256GB
Memory ComponentsTLC
InterfacePCI-Express 3.0 x4
Max Sequential ReadUp to 2200 MBps
Max Sequential WriteUp to 1600 MBps
MTBF2,000,000 hours
FeaturesPCIe Gen 3 x4 interface with read speeds up to 2,200 MB/s and write speeds up to 1,600 MB/s
Massive storage capacity options up to 2TB
LDPC (Low-Density Parity Check) error correction code (ECC) technology, End-To-End (E2E) data protection, and RAID engine for enhanced data integrity and stability
Supports NVMe 1.3, Host Memory Buffer (HMB), and SLC Cache to deliver high and efficient performance
Small form factor M.2 2280 (80mm) allows for easy installation in laptops, small form factor PC systems, and some ultrabooks
Operating Temperature0°C ~ +70°C
Max Shock Resistance1500G / 0.5 ms
Height3.50mm
Width22.00mm
Depth80.00mm
Weight8.00g
وزن الشحنة0.03 kg
أبعاد الطرد124 × 99 × 15 mm

إصدارات أخرى من هذا الطراز

4 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Will the PCIe 3.0 x4 interface work with a motherboard that only has PCIe 2.0 M.2 slots?

The drive runs at PCIe 3.0 x4 speeds up to 2200 MB/s read and 1600 MB/s write; it will operate in a PCIe 2.0 slot but at the lower bandwidth of that slot.

How can I verify the NVMe 1.3 drive is performing at its rated 2200 MB/s read and 1600 MB/s write after installation?

Run a benchmark such as CrystalDiskMark on an empty drive; sequential results should approach 2200 MB/s read and 1600 MB/s write when the SLC cache is active.

Does the M.2 2280 package include a heatsink or mounting screw, or must I buy them separately?

The box contains only the 256 GB SSD; a motherboard standoff screw and any heatsink are supplied by the system builder and must be sourced separately.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.