Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Silverstone Technology
A 92 mm slim case fan with 11 blades, 15.2 mm thickness, addressable RGB lighting and PWM control from 500 to 2,500 RPM
The SilverStone Air Slimmer 90 ARGB is a 92mm case fan built for space-limited builds. Its 15.2mm profile fits tight clearances around heatsinks or in slim chassis where standard 25mm fans cannot. Hydraulic bearing and PWM control give a 500 to 2,500 RPM range for quiet or high-airflow operation. Addressable RGB lighting adds visual customisation for enthusiasts.
A standard 4-1 pin ARGB header links the fan to a compatible motherboard or controller for full colour mixing. Eleven high-efficiency blades move 5.38 to 45.73 CFM while maintaining static pressure for heatsink or exhaust duty. Integrated rubber padding on the corners dampens vibration transferred to the case. Noise stays between 11.3 and 32 dBA across the speed range.
The slim frame allows installation in narrow gaps between a CPU cooler and side panel or in compact ITX layouts. Four-pin PWM header enables automatic speed curves from the motherboard without extra adapters. Black frame and blades keep the look neutral when LEDs are off. Builders needing thicker fans for unrestricted mounts should consider standard 25mm models instead.
| Brand | SilverStone |
|---|---|
| Model | Air Slimmer 90 ARGB |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Fan Size | 90mm |
| Fan Thickness | 15mm |
| Bearing Type | Hydraulic |
| RPM | 500 ~ 2,500 RPM |
| Air Flow | 5.38 ~ 45.73 CFM |
| Noise Level | 11.3 ~ 32 dBA |
| Power Connector | 4 Pin |
| Color | Black |
| LED | Addressable RGB |
| وزن الشحنة | 0.11 kg |
| أبعاد الطرد | 121 × 102 × 25 mm |
The hydraulic bearing is sealed for life and does not require routine maintenance; replacement is only needed if the fan fails after extended use.
The 32 dBA noise ceiling is reached before airflow hits its 45.73 CFM maximum at full speed.
At 2,500 RPM the fan draws minimal power through its 4‑pin PWM connector while the integrated rubber pads keep vibration‑induced heat low.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟