BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
SK hynix
8GB DDR4 DIMM running at 3200MHz with CL22 latency for desktop systems
This SK hynix DIMM adds 8 GB of DDR4 memory at 3200 MHz to compatible desktop or workstation boards. The unbuffered, non-ECC design suits standard consumer platforms that accept 288-pin modules. It runs at the JEDEC-standard 1.2 V and carries a CL22 latency rating. Builders upgrading a single channel or populating a vacant slot will find the 1Rx8 organisation straightforward.
At the rated 3200 MHz the module delivers PC4-25600 bandwidth continuously, limited by the CL22 CAS latency rather than aggressive binning. The 1.2 V operation keeps thermals modest during extended workloads such as compilation, rendering or virtualisation. Because the part is unbuffered and non-ECC, the memory controller handles all refresh and error duties without additional register overhead.
Confirm the motherboard accepts 288-pin DDR4 DIMMs and does not require registered or ECC memory, as this stick provides neither. Check that the board supports 3200 MHz JEDEC speeds or will down-clock automatically. Ensure an empty DIMM slot is available and that the platform’s maximum per-slot capacity covers 8 GB. Match the part number HMA81GU6DJR8N-XN_UA against your system’s qualified-vendor list before ordering.
لا توجد مواصفات منشورة لهذا المنتج بعد.
The module operates at the standard 1.2 V DDR4 voltage, so power draw and heat stay within normal JEDEC limits for continuous operation.
It needs a DDR4 288-pin DIMM slot and a platform that can run PC4-25600 speeds; the memory controller must accept non-ECC unbuffered modules.
No — registered ECC and unbuffered non-ECC DIMMs use different signalling and cannot be used together in the same system.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟