Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
STARTECH
Mounts a Compact Flash card in a 3.5" bay and connects it to a 40 or 44 pin IDE slot with a push-button ejector
This adapter lets you connect a Compact Flash card to a desktop computer through a standard IDE connector. It fits into any 3.5 inch drive bay or expansion slot and requires no drivers for operation. The unit supports bootable storage configurations for older platforms.
Verify that your motherboard or controller card provides a free 40 pin or 44 pin IDE slot before ordering. The adapter does not support hot-swapping, so the computer must be powered off whenever you need to change the Compact Flash card. Ensure your case has an accessible 3.5 inch bay for mounting.
The black metal enclosure mounts in a 3.5 inch bay and protects the card during daily use. A built-in push-button ejector allows easy card removal without tools. Simple jumpers on the board let you set master or slave drive modes for IDE channel configuration.
| Brand | StarTech.com |
|---|---|
| Model | 35BAYCF2IDE |
| Color | Black |
| Cable Length | No |
| Changer Type | Compact Flash Card to IDE |
| Specifications | This product does not support hot-swapping of flash cards while the PC is powered on. You must turn-off your computer to switch cards. |
| Features | Allows Compact flash card to be used as bootable storage Can be mounted in the front or rear panel of your case, to fit into any 3.5"bay or available expansion slot Easily swap cards in and out with built-in push button ejector Easy to use jumpers offer simple master/slave drive setting Fully compatible with Compact Flash Type I/II and IBM Micro-drive Quick and driver free installation into any IDE 40 pin and 44 pin slot |
| وزن الشحنة | 0.25 kg |
| أبعاد الطرد | 170 × 140 × 33 mm |
The adapter fits a 3.5" bay and connects to a 40-pin or 44-pin IDE header. You must supply your own CompactFlash card and an IDE cable.
Use the 40-pin header for standard desktop IDE cables. Use the 44-pin header when connecting to a 2.5" drive header that carries power.
The unit occupies a front or rear 3.5" bay, letting you eject and swap CompactFlash cards with the push button while the system is powered off.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟