نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Streacom DA6 open frame ITX case, black 19 mm stainless steel tubes, vertical layout

Streacom

Streacom STDA6B DA6 Open Frame ITX PC Case Black

SKU CH-SC18-1H1RT

An open-frame Mini-ITX case built from 19 mm stainless-steel tubes with four-sided fan mounting up to 166 mm tube-to-tube clearance, supporting 323 mm GPUs, 280 mm radiators and 105 mm CPU coolers

  • Open frame design enables unrestricted airflow for high-performance cooling
  • 19 mm stainless steel tubes form structure and component mounting points
  • Supports graphics cards up to 323 mm length within SFF volume
  • Universal brackets allow 140 mm fans or radiators up to 280 mm on four sides
  • Accommodates two 3.5 inch and four 2.5 inch drives for flexible storage

Vertical Open Frame ITX Chassis

The Streacom DA6 is a vertical open frame ITX case built to showcase components while maintaining a small-form-factor footprint. Its tubular stainless steel structure wraps the entire chassis, serving as both frame and functional mounting surface for universal brackets. Four-sided mounting access gives unrestricted airflow and flexible cooling layouts. This design suits builders who want hardware on display in a compact, vertical orientation.

Before Ordering Check Clearances

Verify that your CPU cooler does not exceed 105 mm in height and that your graphics card measures 323 mm or less in length. The case accepts 2.5-inch and 3.5-inch drives in the quantities listed, so confirm your storage count fits. Radiator support covers 120, 140, 240 and 280 mm sizes, while fan mounts take 140 mm or smaller units. Builders needing more drive bays or longer GPU clearance should look elsewhere.

Stainless Steel Tube Construction

The main structure uses 19 mm stainless steel tubes that form an unbroken frame, feet and handles in one cohesive design. Universal brackets clamp to these tubes, letting you mount fans, radiators or other hardware on any of the four sides. Tube-to-tube aperture is 150 mm with brackets and 166 mm without, ideal for 140 mm fans. The open layout means dust settles freely, so regular cleaning is part of daily use.

أبرز المميزات

  • Open frame design enables unrestricted airflow for high-performance cooling
  • 19 mm stainless steel tubes form structure and component mounting points
  • Supports graphics cards up to 323 mm length within SFF volume
  • Universal brackets allow 140 mm fans or radiators up to 280 mm on four sides
  • Accommodates two 3.5 inch and four 2.5 inch drives for flexible storage

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

What components come in the box and do I need to buy any brackets or fans separately?

The case ships as the open frame with universal brackets and feet already included. Fans, radiators, CPU cooler, graphics card, power supply and drives are not included and must be purchased separately.

Which radiator size should I choose among 120, 140, 240 or 280 mm for this case?

All four sizes are supported. Pick 240 mm or 280 mm for higher heat loads, or 120 mm and 140 mm if you prefer a slimmer loop and have clearance for the 105 mm CPU cooler limit.

What does the 323 mm maximum graphics card length mean once the card is installed in the frame?

It sets the hard stop for any GPU you install; cards up to 323 mm will fit between the 19 mm stainless tubes with the universal brackets in place, while longer models will hit the frame and cannot be mounted.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.