نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black metal tray with 2.5 inch drive slot inside 3.5 inch hot-swap carrier

Supermicro

Supermicro MCP-220-00043-0N 2.5" to 3.5" SSD accessory

SKU CH-EMBW-EJA68 MPN MCP-220-00043-0N

Converts a single 2.5" drive for installation in a 3.5" hot-swap bay of compatible Supermicro chassis

  • Conversion Tray1 x 2.5" Drive to 3.5" Bay
  • SpecificationsCase Style: Removable Storage Module Bays: 1 x 2.5"Internal
  • FeaturesAdditional Information: 2.5" HDD Tray in 4th Generation 3.5"
  • Mount a 2.5" drive in a 3.5" bay
  • Removable storage module design for easy drive swaps
  • Fits Supermicro 826 836 846 series chassis
  • Supports hot-swap trays in compatible systems
  • Single internal bay adds one 2.5" drive slot

Supermicro 2.5" to 3.5" drive tray

This Supermicro conversion tray fits a single 2.5-inch drive into a 3.5-inch hot-swap bay. It is built for internal use in compatible Supermicro chassis. The tray follows the fourth-generation hot-swap form factor. System builders use it to add solid-state or hard-disk storage without changing the chassis.

Suits owners of listed Supermicro servers

The accessory works with numerous SC826, SC836 and SC846 models including the SC826E2-R800UB, SC836TQ-R800B and SC846E1-R900B. It provides one internal 2.5-inch bay per tray. Builders needing multiple drive positions must install additional trays. Anyone using a different chassis brand or a non-listed Supermicro model cannot use this tray.

Single 2.5" bay in 3.5" hot-swap form factor

The tray converts exactly one 2.5-inch drive bay into a 3.5-inch hot-swap slot. No other bay counts or form factors are supported. This specification decides whether the part matches the storage density and chassis layout required.

أبرز المميزات

  • Mount a 2.5" drive in a 3.5" bay
  • Removable storage module design for easy drive swaps
  • Fits Supermicro 826 836 846 series chassis
  • Supports hot-swap trays in compatible systems
  • Single internal bay adds one 2.5" drive slot

المواصفات

BrandSUPERMICRO
ModelMCP-220-00043-0N
Conversion Tray1 x 2.5" Drive to 3.5" Bay
SpecificationsCase Style: Removable Storage Module
Bays: 1 x 2.5"Internal
Drive Support: 1
Form Factor: Internal
FeaturesAdditional Information: 2.5" HDD Tray in 4th Generation 3.5" Hot Swap Tray.
Compatibility: Supermicro Chassis:
SC826TQ-R800UB
SC826TQ-R800LPV
SC826TQ-R800LPB
SC826E2-R800LPV
SC826E2-R800LPB
SC826E1-R900
SC826E1-R800UB
SC826E1-R800LPV
SC826E1-R800LPB
SC846TQ-R900B
SC846E2-R900B
SC846E1-R900B
SC846E1-R710B
SC846A-R1200B
SC836TQ-R800V
SC836TQ-R800B
SC836TQ-R710B
SC836S2-R800V
SC836S2-R800B
SC836E2-R800V
SC836E2-R800B
SC826E2-R800UB
وزن الشحنة1.45 kg
أبعاد الطرد381 × 279 × 178 mm

أسئلة حول هذا المنتج

How does the 2.5-to-3.5 conversion tray work once it is installed in a server chassis?

The tray holds a single 2.5-inch drive and slides into a 3.5-inch hot-swap bay, presenting the drive to the backplane exactly as a native 3.5-inch unit would.

What interface or standard does the tray itself impose on the drive connection?

The tray is a passive mechanical adapter; it adds no electrical interface, so the drive connects at the full speed the backplane and controller already provide.

Which Supermicro chassis models have the correct 3.5-inch hot-swap bays for this tray to fit?

It fits the fourth-generation 3.5-inch hot-swap bays in the SC826, SC836 and SC846 families, including the SC826TQ-R800UB, SC836E2-R800V and SC846E1-R900B.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.