Supermicro
Supermicro MEM-DR532L-CL01-ER48 32GB DDR5 4800 ECC Registered RDIMM server RAM
32 GB DDR5 4800 ECC registered RDIMM with CL40 latency and 1.10 V operation
- Capacity32GB
- TypeRDIMM
- SpeedDDR5 4800 (PC5 38400)
- CAS LatencyCL40
- Voltage1.10V
- ECCYes
- 32 GB capacity supports large server workloads
- DDR5 4800 speed delivers high data throughput
- ECC registered design corrects memory errors
- CL40 CAS latency provides responsive access timing
- 10 V operation reduces power consumption
32GB DDR5 4800 ECC Registered RDIMM
This 32GB DDR5 module operates at 4800 MT/s with CL40 latency and 1.10V voltage. It uses Micron chips in a 2Rx8 registered layout with on-die ECC. The stick is built for servers and workstations that require registered memory with error correction.
Capacity and headroom
A single 32GB RDIMM suits virtualisation hosts, database nodes and compute clusters that need registered ECC memory. Two-rank density helps populate high-slot-count boards without exceeding rank limits per channel. Workloads demanding more than 32GB per slot will require additional modules or higher-capacity RDIMMs.
DDR5 4800 interface limits
The DDR5 4800 (PC5 38400) interface caps peak bandwidth at the JEDEC base rate. Registered buffering adds a cycle of command delay, which is normal for server platforms. Systems that only support lower DDR5 speeds or unbuffered DIMMs cannot use this module.
أبرز المميزات
- 32 GB capacity supports large server workloads
- DDR5 4800 speed delivers high data throughput
- ECC registered design corrects memory errors
- CL40 CAS latency provides responsive access timing
- 10 V operation reduces power consumption
المواصفات
| Brand | SuperMicro |
|---|---|
| Model | MEM-DR532L-CL01-ER48 |
| Capacity | 32GB |
| Type | RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Micron Chipset |
| وزن الشحنة | 0.09 kg |
| أبعاد الطرد | 229 × 165 × 41 mm |
أسئلة حول هذا المنتج
Will this 32GB DDR5 4800 RDIMM work in a system that already has DDR5 modules installed?
It will operate at the lowest common speed and voltage of the installed modules; mixing ranks or latencies such as CL40 with different timings may limit stability.
How can I verify the module is running at 4800 MT/s with ECC active after installation?
Check the BIOS memory information or an OS tool such as dmidecode; both should report 4800 MT/s, 1.10V, registered operation and ECC enabled.
Does the package include only the 32GB RDIMM or are any cables or brackets supplied?
Only the MEM-DR532L-CL01-ER48 module is included; no cables, brackets or additional hardware are provided.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.



