OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Supermicro
64GB DDR5 4800 ECC Registered RDIMM with CL40 latency and Samsung chipset
This registered ECC module delivers 64GB of DDR5 4800 memory with CL40 latency. It is built for enterprise servers and workstations that require error correction and signal buffering. The dual-rank 2Rx4 organisation uses Samsung components and operates at 1.10V. It suits administrators who need maximum capacity per slot in compatible DDR5 platforms.
At the rated DDR5 4800 frequency the module runs at 1.10V, keeping power draw low for a 64GB stick. Registered buffering reduces electrical load on the memory controller, which helps system thermals in densely populated chassis. No active cooling is required on the module itself; airflow from standard server fans is sufficient. Quiet operation is maintained because the DIMM has no moving parts.
Error correction and registered signalling preserve data integrity during continuous workloads such as virtualisation, databases or high-performance computing. The CL40 timing remains stable at the specified voltage during extended operation. Capacity and bandwidth scale linearly when multiple modules populate the memory channels. Systems that do not support DDR5 RDIMM or registered ECC cannot use this module.
| Brand | SuperMicro |
|---|---|
| Model | MEM-DR564L-SL01-ER48 |
| Capacity | 64GB |
| Type | RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Samsung Chipset |
| وزن الشحنة | 0.09 kg |
| أبعاد الطرد | 229 × 165 × 41 mm |
Power down the server, open the chassis, align the module notch with the DDR5 slot key, press firmly until both retention clips lock, then verify 4800 MT/s speed in BIOS.
No routine maintenance is required; ECC corrects single-bit errors on the fly, and the module should only be replaced if the server logs report uncorrectable errors.
The JEDEC DDR5 thermal envelope is reached first; prolonged heavy traffic raises case temperature until the module throttles to protect data integrity.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟