BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Supermicro
1U server power supply delivering 520 W through a 24-pin connector with +12 V at 39 A, +5 V at 20 A, +3.3 V at 16 A and +5 VSB at 3 A
The Supermicro PWS-521-1H delivers 520W in a 1U form factor for rack-mount servers. It provides multi-output rails including +12V at 39A, +5V at 20A, +3.3V at 16A and +5VSB at 3A. A 24Pin main connector feeds the motherboard directly. This unit suits administrators refreshing or repairing compatible Supermicro chassis. It is not for builders needing ATX dimensions, higher wattage or modular cabling.
The supply fits a 9.45" x 3.94" x 1.57" enclosure weighing 3.3 lbs, matching standard 1U server bays. Internal fans draw cool air through the chassis front and exhaust at the rear under system fan control. Acoustic output varies with server load and chassis fan curves rather than the supply alone. Power conversion follows the rated rail limits without extra headroom beyond 520W.
The unit ships as a standalone power supply module without cables, rails or mounting screws. No configuration utility, monitoring agent or firmware tool is included in the package. Server management features such as IPMI sensor reading depend on the host platform BMC and chassis wiring. Administrators must source any required power cables or mounting hardware separately.
| Brand | SuperMicro |
|---|---|
| Model | PWS-521-1H |
| Maximum Power | 520W |
| Main Connector | 24Pin |
| Output Current | +12V@39A, +5V@20A, +3.3V@16A, +5VSB@3A |
| Dimensions | 9.45" x 3.94" x 1.57" |
| Weight | 3.3 lbs. |
| وزن الشحنة | 1.81 kg |
| أبعاد الطرد | 254 × 152 × 51 mm |
Align the 24Pin connector with the motherboard socket, press firmly until the latch clicks, then secure the 9.45" x 3.94" x 1.57" unit with the chassis screws; the step often missed is fully seating the latch before tightening screws.
Periodically clear dust from the intake and exhaust vents with compressed air while the server is powered off; no user-serviceable parts are inside, so replacement is only required if the unit fails to deliver its rated outputs.
The +12V rail is rated at 39A and carries the bulk of modern server power draw, so it reaches its maximum contribution before the +5V 20A, +3.3V 16A or +5VSB 3A rails.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟