OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Supermicro
Dual-socket LGA771 board with Intel 5000X chipset, eight FB-DIMM slots for DDR2 at 533 or 667 MHz, two PCIe x16 and two PCI-X expansion slots, six Serial ATA-300 ports with RAID.
The Supermicro X7DAE is an extended ATX motherboard built around the Intel 5000X chipset for dual LGA771 Xeon processors. It targets professionals maintaining legacy compute clusters or specialised server workloads that still rely on DDR2 FB-DIMM memory. Eight 240-pin slots accept 533 MHz or 667 MHz modules at 1.8 V. The board measures 12 in by 13.1 in and includes dual Gigabit Ethernet via the Intel 82563EB controller.
The board operates from 208 V to 230 V AC input and provides two CPU sockets with independent cooling zones. Two PCIe x16 slots and two 133 MHz PCI-X slots share airflow paths with the memory banks, so case ventilation must handle sustained multi-socket loads. Six Serial ATA-300 ports and one ATA-100 connector draw minimal extra power, while the onboard IPMI subsystem uses Web, SNMP and Telnet for remote sensor monitoring without adding acoustic load.
This motherboard upgrades systems that previously used single-socket or lower-bandwidth chipsets and now need 1333 MHz front-side bus throughput. The jump is worth it when workloads scale across two Xeon 5000 series processors and require the combined memory bandwidth of eight FB-DIMM channels. Buyers who need newer memory standards, single-thread optimisation or integrated modern storage interfaces will not be served by this platform.
لا توجد مواصفات منشورة لهذا المنتج بعد.
Mount the 12 by 13.1 inch E-ATX board using the extended ATX standoff holes; the step often missed is fitting all nine standoffs before tightening any screw to prevent flex.
The eight 240-pin FB-DIMM slots run at 1.8 V with 533 or 667 MHz DDR2; plan to replace any module that shows correctable ECC errors during POST.
The 1333 MHz front-side bus and FB-DIMM bandwidth saturate before the PCI-X 133 MHz or Serial ATA-300 interfaces become bottlenecks.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟