نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Red 2.85mm In-PLA filament spool, 1kg, matte finish

Taulman 3D

Taulman 3D In-PLA Filament 2.85mm 1kg Red 3d printers accessory

SKU CH-7J7X-19VAK

Red 2.85 mm PLA filament with 5,043 PSI tensile strength and 497 % elongation for durable prints

  • ColorRed
  • TypeFilament
  • Increased tensile strength to 10,000 psi for durable functional parts
  • Elongation of 497% allows flexible prints without snapping
  • Clear colour formulation gives vibrant red parts with high clarity
  • Prints at 217-222°C with 70°C bed for reliable adhesion
  • 85mm diameter on 1kg spool fits compatible 3D printers

Industrial PLA filament for functional prints

Taulman 3D In-PLA is a 2.85 mm red filament supplied on a 1 kg spool. It targets makers who need stronger, clearer parts than standard PLA can deliver. The material suits collectibles, figurines, phone cases and electronic enclosures where both mechanical and thermal stress occur.

Standard 2.85 mm path with heated bed

Load the spool on any printer that accepts 2.85 mm filament and set the nozzle between 217C and 222C with the bed at 70C. The main issue is ensuring the hot-end reaches the upper temperature cleanly; under-extrusion appears if the nozzle runs too cool.

Tensile strength of 5,043 PSI with 497 % elongation

These figures show the filament can stretch significantly before breaking, making it the deciding spec for snap-fit parts, wearable items or enclosures that flex in use. Buyers who need a rigid, low-elongation material should choose a different formulation.

أبرز المميزات

  • Increased tensile strength to 10,000 psi for durable functional parts
  • Elongation of 497% allows flexible prints without snapping
  • Clear colour formulation gives vibrant red parts with high clarity
  • Prints at 217-222°C with 70°C bed for reliable adhesion
  • 85mm diameter on 1kg spool fits compatible 3D printers

المواصفات

Brandtaulman3d
ColorRed
TypeFilament

أسئلة حول هذا المنتج

How can I verify the filament is printing correctly at the recommended 217C to 222C nozzle temperature?

Successful prints will show smooth layer adhesion and the stated red colour clarity without brittleness, confirming the material is flowing properly at the specified temperature range.

What is included in the package and do I need to buy a spool holder separately?

The box contains a single 1 kg spool of 2.85 mm red In-PLA filament; a compatible spool holder or dry box is not included and must be sourced separately if your printer requires one.

Should I choose the 2.85 mm diameter or a different size for my printer?

This listing is only offered in 2.85 mm diameter; select it if your extruder is designed for that size, otherwise you will need a different product matching your printer's filament specification.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.