نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Red 3D printer filament spool 2.85mm diameter

Taulman 3D

Taulman 3D N-vent Filament 2.85mm 1lb Red 3D printers accessory

SKU CH-Q5D2-FT6YM

Low-odour, styrene-free filament prints at 250-255 °C with 2.85 mm diameter for clear, glossy, durable parts

  • ColorRed
  • TypeFilament
  • Low-odor, styrene-free printing for a healthier workspace
  • Clear, glossy finish enhances part aesthetics
  • Easy processing at 250-255 °C with 2.85 mm filament
  • Retains mechanical properties in functional 3D applications
  • Eastman Amphora™ polymer delivers durability and toughness

Taulman 3D N-vent Filament 2.85mm

This red 3D printing filament uses Eastman Amphora polymer to deliver clarity and gloss with low-odor, styrene-free processing. It is suited for makers who want functional, durable parts that retain their properties after printing and exhibit excellent aesthetics. The 2.85 mm diameter spool weighs 1 lb and is designed for standard fused-deposition printers.

Printing temperature window 250 to 255 °C

The material requires a nozzle temperature between 250 °C and 255 °C, so the printer hot-end must reliably reach and hold this range. Printers limited to lower maximum temperatures or lacking precise thermal control will not process this filament correctly. Users should verify their machine's capability before purchase.

Upgrades from standard PLA or ABS spools

Switching to this Amphora-based filament makes sense when parts need better toughness, clarity and low-odor printing without styrene emissions. It is not for users who only print basic models at lower temperatures or who require a filament diameter other than 2.85 mm.

أبرز المميزات

  • Low-odor, styrene-free printing for a healthier workspace
  • Clear, glossy finish enhances part aesthetics
  • Easy processing at 250-255 °C with 2.85 mm filament
  • Retains mechanical properties in functional 3D applications
  • Eastman Amphora™ polymer delivers durability and toughness

المواصفات

Brandtaulman3d
ColorRed
TypeFilament

أسئلة حول هذا المنتج

Which diameter should I choose for my printer?

This spool is 2.85 mm filament; use it only with printers that accept 2.85 mm material.

What nozzle temperature does this filament need in practice?

Print between 250 °C and 255 °C for reliable extrusion and layer adhesion.

Does the Eastman Amphora polymer impose any special handling or ventilation requirements?

It is low-odour and styrene-free, so no extra ventilation is required beyond normal workshop airflow.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.