نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black vented 1U sliding rack shelf, 19in wide, adjustable depth 21.7 to 35.4in, steel construction

TAURKENAM

TAURKENAM 1U Sliding Rack Shelf 4-Post 19in 21.7-35.4in Depth 110lbs Black

SKU CH-PMEY-XV7XY

A vented 1U sliding shelf for 19-inch racks with adjustable 21.7 to 35.4-inch depth, 14.6-inch extension and 110lb capacity

  • Fits standard 19in racks with adjustable 21.7-35.4in mounting depth
  • Slides 14.6in for easy equipment access and service
  • Vented steel surface maintains airflow to protect gear from overheating
  • Supports up to 110lbs on cold-rolled SPCC steel construction
  • Flips over to save space in IT, AV, or networking setups

Universal 19-inch 4-post rack shelf

This 1U sliding shelf fits standard 19-inch server racks and cabinets. It accepts equipment on a fixed surface that is 21.7 inches deep and slides forward 14.6 inches for access. The mounting depth adjusts between 21.7 and 35.4 inches to match different rack depths. It is built for IT, networking, AV and similar equipment in professional or home environments.

Installation uses supplied hardware for two hole

The package includes two sets of mounting screws for square-hole and tapped-hole rails, plus cable ties and anti-slip stops. A video or printed instruction is provided for reference. The sliding guide rails let the shelf extend smoothly so devices can be loaded or serviced without removing the unit. Assembly is required before mounting, and the shelf can also be flipped over to conserve vertical space when needed.

Weight capacity of 110 pounds

The shelf is constructed from SPCC commercial cold-rolled steel and rated to hold up to 110 lbs of equipment. The vented top surface promotes consistent airflow to help dissipate heat from mounted devices. This load rating is the key specification for deciding whether the shelf can support your intended hardware. Buyers with heavier appliances must choose a higher-rated alternative.

أبرز المميزات

  • Fits standard 19in racks with adjustable 21.7-35.4in mounting depth
  • Slides 14.6in for easy equipment access and service
  • Vented steel surface maintains airflow to protect gear from overheating
  • Supports up to 110lbs on cold-rolled SPCC steel construction
  • Flips over to save space in IT, AV, or networking setups

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

How can I verify the shelf slides the full 14.6 in after I mount it?

Extend the shelf until the rails reach their stop; the travel should measure 14.6 in from the closed position.

Which mounting hardware, cable ties and anti-slip stops are included, and what must I source myself?

The package includes two screw types for square and tapped holes, plus cable ties and anti-slip stops; no extra hardware is required for a standard 19 in rack.

Should I choose the 21.7 in fixed depth or the 35.4 in maximum depth for my rack?

Measure your rack's front-to-rear rail distance; if it falls between 21.7 in and 35.4 in the adjustable brackets will fit.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.