The Perfect Part Solar Cable Connectors 10 Pairs Male Female Black
- DC Power Supplies
- The Perfect Part
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
The Perfect Part
Twenty pairs of MC4-compatible solar connectors rated to 30 A, IP67 when mated, and built to withstand -40 °C to +90 °C
The Perfect Part Solar Cable Connectors ship as a 20-pair set of male and female DC power connectors built for photovoltaic installations. The PPO plus ABS housings with PC/PA insulation accept 2.5 mm², 4 mm² and 6 mm² cables, covering AWG 14, 12 and 10. Silver-plated copper contacts deliver a contact resistance of 0.2 mΩ and suit installers who need a single connector family across multiple string sizes.
Rated from -40 °C to +90 °C, the connectors meet UL94-V0 or UL94-5VA flame class and achieve IP2X protection when unmated and IP67 once mated. The 4.0 mm pin diameter requires 50 N insertion and withdrawal force, giving a secure lock that resists vibration in outdoor arrays. No active cooling or power draw is involved, so the parts add no thermal load to the system.
The single specification that decides fit is the rated current: 22 A on 2.5 mm² cable and 30 A on 4 mm² or 6 mm² cable. Builders whose design calls for higher continuous current per connector cannot use this series, and projects limited to smaller-gauge wire should verify the 22 A ceiling meets their string calculations.
| Type | DC Power Supplies |
|---|---|
| Engine Brand | The Perfect Part |
| Starter Type | Recoil |
| Material | PPO + ABS |
| Temperature Range | -40 C ~ +90 C |
| Primary Openings | 1 |
| Secondary Openings | 1 |
| Wire Type | AI |
| Features | 20-pack; Color: Black; Material: PPO + ABS; Insulation Material: PC/PA, black |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Strip the insulation to the exact length marked on the crimp tool die, insert the wire fully so the copper reaches the pin shoulder, then compress with a calibrated 4 mm² hex die; a loose crimp or over-stripped wire adds resistance and heat.
The silver-plated copper contacts and the PC/PA insulation see the most stress; the 50 N insertion and withdrawal forces stay within spec for thousands of cycles, but grit or UV-cracked insulation will eventually demand replacement of the affected pair.
The housing is rated to 90 °C; at 30 A continuous the contact temperature approaches that ceiling, so derate or improve airflow if ambient temperatures regularly exceed 40 °C to avoid tripping the UL94-V0 flame-class threshold.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟