نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

Thermaltake

Thermaltake CT140 ARGB Sync 140 mm 2-Fan Pack CL-F154-PL14SW-A

SKU CH-4T88-GBM69 MPN CL-F154-PL14SW-A

Two 140 mm hydraulic-bearing fans deliver 77.37 CFM at up to 1500 RPM with 5 V ARGB motherboard sync and daisy-chain cabling

  • Fan Counts2 Fans
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size140mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

LED ARGB

Model CT140

  • Optimised airflow with a 7-blade design delivering 77.37 CFM
  • Quiet operation at 30.5 dB-A across 500–1500 RPM range
  • Vibration-free mounting via anti-vibration pads and solid frame
  • Addressable RGB lighting with 9 LEDs synced through 5V motherboard software
  • Simplified cabling using daisy-chain design for two 140 mm fans

Two-Fan Pack for 140 mm Mounts

This pack contains two 140 mm case fans with white frames and addressable RGB lighting. Each unit uses a hydraulic bearing and a 7-blade design rated for 77.37 CFM at up to 1500 RPM. They connect via standard 4-pin PWM and 3-pin 5 V ARGB headers. The fans suit builders who want synchronised lighting across a pair of matching units.

Daisy-Chain Cabling Reduces Header Use

Both fans support daisy-chaining for power and ARGB signals, so a single PWM header and a single 5 V ARGB header can drive the pair. The 25 mm thickness fits typical case and radiator mounting points without extra brackets. Anti-vibration corners help decouple the frame from the chassis. Builders with limited motherboard headers or tight routing space gain a cleaner install.

Hydraulic Bearing Holds Steady at Speed

The hydraulic bearing maintains consistent rotation across the 500 to 1500 PWM range, keeping airflow near 77.37 CFM while noise stays around 30.5 dB-A at maximum speed. The solid frame resists flex during long sessions, preserving blade clearance and bearing alignment. Users who run fans at high duty cycles for extended periods get stable output without rattling or drift.

أبرز المميزات

  • Optimised airflow with a 7-blade design delivering 77.37 CFM
  • Quiet operation at 30.5 dB-A across 500–1500 RPM range
  • Vibration-free mounting via anti-vibration pads and solid frame
  • Addressable RGB lighting with 9 LEDs synced through 5V motherboard software
  • Simplified cabling using daisy-chain design for two 140 mm fans

المواصفات

BrandThermaltake
ModelCT140 ARGB Sync PC Cooling Fan White (2-Fan Pack)
Part NumberCL-F154-PL14SW-A
Fan Counts2 Fans
TypeCase Fan
CompatibilityCase
Fan Size140mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPMPWM 500~1500 R.P.M
Air Flow77.37 CFM
Noise Level30.5 dB-A
Power Connector4 PIN PWM
3 PIN-ARGB
ColorWhite
LEDARGB
Dimensions140 x 140 x 25 mm
وزن الشحنة0.61 kg
أبعاد الطرد211 × 160 × 61 mm

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

What is the maximum airflow each 140 mm fan can deliver at 1500 RPM?

Each fan reaches 77.37 CFM at the top PWM speed of 1500 RPM, using a 7-blade design optimised for static pressure on radiators or case meshes.

How much noise does the hydraulic bearing produce at full speed?

The spec lists 30.5 dB-A at 1500 RPM, so a pair running all day stays in the low-30 dB range typical of quiet hydraulic-bearing fans.

Which motherboard headers are needed to run both PWM control and ARGB lighting?

One 4-pin PWM header for speed control and one 5 V 3-pin ARGB header for the 9 addressable LEDs; the daisy-chain cables let both fans share each header.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.