HP 507283-001 146GB 10000 RPM SAS 2.5" internal hard drive
- Bare Drive
- SATA
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Transcend
M.2 2242 SATA internal SSD with 240 GB capacity, up to 560 MB/s read and 500 MB/s write speeds
This 240GB internal solid-state drive uses the M.2 2280 form factor and a SATA III 6Gb/s interface. It is built with 3D NAND flash and SLC caching technology to serve compact laptops and desktops needing a straightforward storage upgrade.
The SATA III connection caps maximum sequential throughput at 6Gb/s, so real-world speeds cannot exceed this bus limit regardless of the drive's internal capability. Random 4KB performance reaches up to 65,000 read IOPS and 85,000 write IOPS within that constraint.
The drive's peak sequential read speed is rated at 560 MB/s, with sequential write up to 500 MB/s. This single figure determines whether the drive meets the throughput requirement for a given SATA-based system.
| Brand | Transcend |
|---|---|
| Model | TS120GMTS420S |
| Part Number | TS120GMTS420S |
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | M.2 2280 |
| Capacity | 120GB |
| Interface | SATA III |
| Protocol | SATA |
| Connector | SATA |
| Cache | 120 unknown_modifier |
| Max Sequential Read | 420 megabits_per_second |
| Max Sequential Write | 500 MB per second |
| Sustained Random 4KB Read | 420 megabits_per_second |
| 4KB Random Write | 420 megabits_per_second |
| Features | 560 megabytes_per_second |
| Height | 10.000 |
| Width | 13.000 |
| Depth | 2.2 in x 0.39 in x 8.0 in |
| Weight | 0.02 |
| Package Content | 0 |
The 240GB model provides twice the storage of the 120GB version while keeping the same M.2 2280 form factor and SATA III interface.
It represents the peak throughput the controller can deliver over the SATA III link; real-world speeds will be lower and depend on the system workload and file sizes.
The SATA III 6 Gb/s connection caps maximum sequential transfer at roughly 560 MB/s, so the drive cannot exceed that ceiling even if the flash memory is faster.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟